Models > KUDS30SXWH4 > Parts

KUDS30SXWH4 KitchenAid Dishwasher - Parts

Jump to:

37 - 48 of 207
Keep searches simple, eg. "belt" or "pump".
This is the replacement impeller kit for your dishwasher. This impeller kit comes with 4 pieces, including the impeller and seals which you will need for the repair. The impeller and seal kit is mount...
No Longer Available
The tine row retainer for your dishwasher locks the tine row in the vertical position. If the tine row retainer is broken or missing, the tine row will not stand vertically, and it will not be effecti...
In Stock
Order now and your part arrives by Nov 28
This hose clamp is sold individually.
In Stock
Order now and your part arrives by Nov 28
Sold individually.
In Stock
Order now and your part arrives by Nov 28
This is the replacement adjuster housing for your dishwasher. It is made of gray plastic and is approximately 4X4 inches. The adjuster housing clips into the dish rack and allows you to adjust the hei...
In Stock
Order now and your part arrives by Nov 28
Sold individually.
In Stock
Order now and your part arrives by Nov 28
Measures level of soil in the water.
In Stock
Order now and your part arrives by Nov 28
Water is supplied to the lower spray arm via the pump assembly.
In Stock
Order now and your part arrives by Nov 28
This mounting kit can be used on solid surface countertops.
In Stock
Order now and your part arrives by Nov 28
Sold individually.
In Stock
Order now and your part arrives by Nov 28
This part is a replacement retainer for your dishwasher. It is made of gray plastic and measures approximately 3 inches high by 2.5 inches deep. This retainer is used on the lower rack of your dishwas...
In Stock
Order now and your part arrives by Nov 28
Supplies water from the main water feed tube to the middle manifold water tube.
In Stock
Order now and your part arrives by Nov 28
37 - 48 of 207