4KPDI620T2 KitchenAid Dishwasher - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Jack from Scarsdale, NY
- Parts Used:
- 4162655
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Upper rack conduit tube came loose and melted on the heating coil
Simple replacement with new part
Was this instruction helpful to you?
Thank you for voting!
wheels on bottom drawer broken
Took out drawer. Replaced broken/missing wheels and axles. Used pliers to snap them together.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- sarah from MELBOURNE, FL
- Parts Used:
- 4162321
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
the plastic roller axles had become brittle, and were breaking, dislodging the little wheels that guide the lower rack in and out of the unit smoothly
broke off the remaining roller axles, pushed the new roller axles into place, then snapped the little wheels onto new axles. I FELT LIKE WONDER-WOMAN, FIXING MY OWN DISHWASHER!!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Eddy from Greenville, CA
- Parts Used:
- 4169400
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Screw drivers
no problem---color change
unscrewed 4 screws on top panel and 2 on bottom panel... real easy fix.
Was this instruction helpful to you?
Thank you for voting!
Ordered axles to replace several originals which had broken.
The installation video is excellent. What should have been a simple fix proved to be difficult for me. Perhaps a function of not enough hand strength to "snap" the axles in place. After trying to use a screwdriver to pry open a side enough to slide on and soaking in hot water to make the axles more pliable -- neither of which worked -- I turned the rack on its side, inserted the axle in the opening and then stepped on it. Voila! That worked beautifully and the next two were easy using the "stand-on-it" method. For anyone with a similar issue as far as hand strength, I recommend this method.
Was this instruction helpful to you?
Thank you for voting!
bottom tray had come off
I took off all the old axils and put new ones on,and then I slide the wheels on and That was all is to it. EASY!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Karen from Lafayette, IN
- Parts Used:
- WPW10254672
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Needed a faucet connector
I bought the portable dishwasher on Craigslist, and it didn't have the connector that goes on the kitchen faucet. Ordered it here, got it in a few days, and didn't need any tools - just had to screw it on. Good as gold!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Trisha from Oklahoma City, OK
- Parts Used:
- WPW10254672
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Could not fit hoses for portable dishwasher onto existing faucet
I knew I needed a faucet adapter, but thought I could just go to my local home depot and get the part...not so much. After 3 trips and not getting the part I truly needed I ordered the part from partselect. I received it literally the day after I ordered it, screwed in place with no tools, attached the coupler/hoses to the faucet and washed dishes. I wish I would have ordered the part from partselect before even bother with home depot. I would have saved myself a lot of trouble! Extremely happy! Thank you!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Nancy from Durham, NC
- Parts Used:
- WP9741251
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
The left mounting bracket had broken..
I had called an appliance repairman...I gave him the model #- he called me back in 2 seconds and said it was too old.. no parts available.. wanted to charge me $100 to come and look.I found parts select online. the part came in one day... and my handy man/put the new bracket on.. the dishwasher was put in new in 1991 and still works like a charm..thanks thanks
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- George from Cameron, NC
- Parts Used:
- WPW10254672
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
changed out kitchen sink faucet set
replaced the faucet adapter I did not save when I change out the kitchen sink faucet set
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- David from St. Marys, KS
- Parts Used:
- 4162321
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- Less than 15 mins
4 pcs broken & would not hold wheel on Basket.
Push off - Push on new plastic Part. Very stiff. Used a wooden spoon handle!!! Job done!
Was this instruction helpful to you?
Thank you for voting!
Roller Wheel on lower dish rack broke- rack didn't sit or roll properly.
used screwdriver to remove roller axle. Snapped on new axle and wheel. I ordered two extra sets just in case future wheels brake. simple. 16 Year old dishwasher works fine!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- David from Carlisle, PA
- Parts Used:
- WP4162568
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
Soap Cup Lid was not opening during main wash cycle
Very easy. Disconnect power to the dishwasher via a breaker or fuse. Open the door and remove just the 4 screws on the inside lip of the door. Do not remove the screws hoding the closing brackets. Remove the front glass and chrome panel between the control panel and the kick panel. This will give you access to the soap cup and bi-metal. Remove the one retaining screw and remove the bi-metal,taking note of the position of the wires. Remove the wires, by grasping the connectors (I used needle nose pliers for this), not the wires, and re-intsall them on the new bi-metal. Re-install bi-metal on soap cup assembly, "cock" the release lever by closing the soap cup cover and manually trip the bi-metal to make sure it will release the lever and open the cover. Re-install the front panel with screws. Restore power and test appliance.
Was this instruction helpful to you?
Thank you for voting!
A few rollers and axels had gone missing
Easily one of the easiest repairs I have ever done. The new bits snapped into place and now the bottom rack rolls in and out like brand new.The ease and speed of finding the parts was really helpful. This is an old model and to be able to find the exact parts I needed so fast and so cheap was great. Oh and they arrived the day after I ordered them! Insanely fast!
Was this instruction helpful to you?
Thank you for voting!