KUDB21S0 KitchenAid Dishwasher - Instructions

Received your parts, Popped them both right into place, Even though only one side needed to be replaced, I wanted them to match up. It was amazing how easy this was. My husband was quite impressed I had ordered these rather then look for either a new or used dryer from some other source.

pulled out the old broken axels and pushen in the new ones and then snapped in the wheels.

...popped out the old in with the new...could not have been easier!

I can't believe I waited so long to find this part and do this. I got the package very fast, opened it, took the piece to my dryer and popped it into place with my fingers. It worked perfectly! this took all of two minutes and saved me from having to hold the dryer door closed with a stick. Thank you, thank you!!!

This repair was a cinch. Pliers to pull out the metal piece and a screwdriver to pry out the 'catch' part in the door. Both replacement pieces went right in. I cannot believe how easy and CHEAP this fix was, and I'm so glad I found this site!! I figured I would have to call a repairman and pay big bucks, so I put it off, but the door was getting worse--slamming it so hard to keep it shut. Again, thanks for this great site.

I ordered gray enamel drip bowls and they fit perfectly. Unfortunately 2 of them were chipped and bent slightly. They still worked which was better than the make shift ill fitting ones that came with the house so I decided to keep them. I did tell parts select about it and they sent me a new order of drip pans at no charge. I used the perfect ones but the 8" drip pans flaked off paint after one use. I guess this is an Amana defect...the paint doesn't stick under heat.

I did NOT have to repair the latch on the actual door, just the small metal piece that it hooks on (on the dryer itself) and it took about 10 seconds to.....do it myself. Just used needle nose pliers so squeeze the piece together and fit it in. thanks

use screwdriver topry plastic out plyers to pull out metal latch put new parts in

Soaked the axles in warm water and installed them, then placed the roller wheel on the axle. A no-brainer!

Since the old part had fallen off of the appliance, all I needed to do was reattach the new parts, by sliding the hose onto where the water comes through and then attach the hanger to the top rack of the dishwasher. It was very easy to do and required no tools and took about a minute to finish.

I took the dishtray outside to the patio and removed all the old wheels and axles. Sipped some coffee and then snapped on all the new axles and wheels. It now rolls like new even when full of dishes. I,m glad I found your website again!

With a very upset husband. The wheels were difficult to take off, although after he got the hang of it he stopped breaking them. I had ordered 6 wheels and axles, should have ordered 8, but the ones he didn't break we could use again. Now, the old cutlery basket from the old rack does not fit into the new rack. Today I ordered a new basket after being told the manufacturer must have changed the rack. Hoping the new basket fits the new rack.

Removed broken axles by hand and installed new axles and wheels. The repair took less than 5 mins.

The old catch on my dryer door was gone and I was keeping the door closed using tape. I ordered the part and it arrived with no hassles in about 5 days. The repair was too easy. I just popped the new catch in place. It took all of about 30 seconds to complete using no tools. I wish all home repairs were this easy.

I ordered the part and it fit perfectly!! About five minutes to screw it onto my faucet and problem solved!!!