KUDP01DLBS3 KitchenAid Dishwasher - Parts

This gray dishrack track stop is located on the upper dishrack track. It refrains the upper dishrack from pulling out too far.

16ml

This part is used to cover the chopper blades.

Also known as a washer.

This is the cap for your rinse aid dispenser.

This clamp helps to prevent leaking by holding the end of water hose in place.

Sold individually. The size of this screw is 1/4" hex head and 10-12 x 1/2".

This part forces the water from the pump to the sump area for discharge.

This dishwasher heating element is not designed to heat the water that enters it, but is designed to maintain the heat of the water that enters the dishwasher. It is located on the bottom of the dishw...

This middle spray arm cleans the dishes by rotating and distributing water throughout the tub.