Models > KDFS424SJP0 > Instructions

KDFS424SJP0 KitchenAid Dishwasher - Instructions

Jump to:

All Instructions for the KDFS424SJP0
31 - 45 of 48
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Melvyn from Mountain Springs, NV
Parts Used:
W10728159
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
old dish holders rotted from hard water
replace bottom tray with wheels. I recommend get them with wheels already attached. Very difficult to remove old wheels from rack.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Lisa from Ormond Beach, FL
Parts Used:
W10728160
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Two rusted lower tine rows
Quick and easy repair--less than a minute for each row. The replacement tines are a finer gauge than the originals but fit the space well.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Scott from Maple Valley, WA
Parts Used:
WP8269145
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
Under Counter Anti-Tip Brackets Broke
I put this unit in about 3 years ago and the brackets broke at the crease and the dishwasher fell forward. Found the right bracket and when it arrived looked a match. Checked link to video showing how to properly install the brackets. The original manufacturer never stated that the tab that goes through the frame is supposed to be bent 90 degrees to prevent the bracket from coming out. Thank you PartSelect for that video because I would probably end up ordering brackets again in a few years.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Donna K from Alexander, NY
Parts Used:
W10728159
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
prongs were braking off on the rack
took the old rack out and rolled the new one in. Took about 2 mins if at all that.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Dennis from Naperville, IL
Parts Used:
W10728159
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
replace lower rack
open dishwasher remove lower rack roll in new lower rack
Was this instruction helpful to you?
Thank you for voting!
Customer:
Carol from Lutherville, MD
Parts Used:
W10728160
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
lower rack tine was broken
Just snapped it in
Was this instruction helpful to you?
Thank you for voting!
Customer:
Bob from Montrose, CO
Parts Used:
WP8269145
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers
I had not needed to install the mounting brackets that came with the dishwasher because the old counter top was 1 inch lower than standard and I was able to just wedge the dishwasher into the space and it would not tip.
I simply disconnected the power line to the dishwasher and pulled it out enough to install the mounting brackets. The installation manual that came with the dishwasher described how to install the brackets and I simply followed directions.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Anita from Croton on Hudson, NY
Parts Used:
W10728159
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Dishwasher basket broken
We used the rollers and utensil basket from the old basket and in less than 30 minutes the new basket was ready and installed.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Susan from CHARLOTTESVILLE, VA
Parts Used:
W10728159
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Simply replaced lower dish rack in dishwasher.
No explanation is necessary.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Edith from Marietta, OH
Parts Used:
W10728160
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
none
removed old rack and replaced with the new.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the KDFS424SJP0
31 - 45 of 48