Models > 19385 > Instructions

19385 (1988) Kenmore Dishwasher - Instructions

Jump to:

All Instructions for the 19385
61 - 75 of 102
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
RICHARD from JERSEY SHORE, PA
Parts Used:
4317933
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
wheels broke on lower tray
pulled old wheel housing off and replaced with new replacements ones. Straightforward task.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
MARK from W.BARNSTABLE, MA
Parts Used:
4317933
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
rear rollers on bottom rack broke off
real easy to install. i took off all 4 sets of rollers. i installed the first set improperly and the 2nd,3rd and 4th properly. i then went back and refasten the first one. no tools needed. 15 min.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Gary from Palm Springs, CA
Parts Used:
WP300845
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Broken Part
I just installed the new part. There were no tools required. I bought an extra part
I ordered the part on Monday, and it arrivefor the other side in case it breaks.
d by FedEx the next day. I live in Southern California.

Great service, thanks.
3 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Gary from Erving, MA
Parts Used:
300988
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
melted waste water guard
removed what was left of old guard and replaced it with new.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Susan from Oakland, CA
Parts Used:
4317933
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers
Three rollers fell off
I removed the old rollers. This took a while to figure out how to get the old rollers off. Also it was difficult due to the fact that they had been on the basket for a long time. As soon as I figured out how to take them off and put the new ones on, it was fairly easy. The instructions were non -existent which is why it took a while.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Phillip D from Auburn, AL
Parts Used:
4387043
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Latch had broken on detergent dispenser cover
Remove retainer that holds door color slide in front of door & then remove the slide. Remove cardboard backing, remove electric latch release, remove latch & replace with new one. Open door & slide out the cup dispenser cover pin & spring & replace with new ones. This was all straight-forward & simple.
8 of 26 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Philip from Greene, ME
Parts Used:
W10311986
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Installed wheel assemblies to rack
Assemblies snap on, no tools needed
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Tom from Wappingers Falls, NY
Parts Used:
4317933
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
6 wheels missing
easy - removed old wheel holders & pushed new

ones in place. parts came in two days !!!!
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Michael from Las Vegas, NY
Parts Used:
4387043
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
soap door hinge broke
I took the pin and i slide it through the first hole attached the spring then sldie it through the second hole and snap the cover on
4 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Howard from Boynton Beach, FL
Parts Used:
350930
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
Both outside door handles turned very beige
Everything worked perfectly---thanks to the suggestion of your call center agent. She suggested that since the replacement door handles were no longer available, I should consider repainting them--it worked like a charm. Please tell her she was a life saver. We rent that house in Fl and my returning tenants had complained about the discoloring refer handles. Thank you
23 of 74 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Nicole from Newnan, GA
Parts Used:
4387043
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
The previous rod holding the cup in place broke
Remove completely the old one and installed the new entire kit.
2 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
craig from Columbia, TN
Parts Used:
4387043
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
was just missing the door and spring
You slide the pin that holds the door in the first hole. then you slide the spring in next. The you slide the pin through the last hole. After that you gently push the door onto the pin till it snaps into place. And your done.
4 of 21 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Karolyn from Wellington, FL
Parts Used:
WP304170
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Super Fast Shipping
The part arrived the next day with regular postage, outstanding service.
7 of 64 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Sue from Bellevue, OH
Parts Used:
WP304204
Difficulty Level:
Very Difficult
Total Repair Time:
Less than 15 mins
Tools:
Pliers
Remove/Replace Upper Spray Arm
Tried using my hands to bend back the locking plastic connectors enough to get them onto the metal upper storage rack;was afraid of breaking the connectors so I used my utility tool needle nose pliers to give me leverage. This time I was successful. Believe me,it was frustrating for what seemed a long time. No,for me it was not easy.
Was this instruction helpful to you?
Thank you for voting!
Customer:
MARVIN from NESBIT, MS
Parts Used:
4317933
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
lower rack wheels broke off roller assembly
Old tandem rack for rollers popped off lower rack by applying a small amount of pressure. New tandem rack rollers look slightly different, but pop right in place. By replacing all four tandem rack rollers the lower rack glides smoothly in and out of the dishwasher. Entire replacement can be done without tools, by hand in less than fifteen minutes.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 19385
61 - 75 of 102