66513292K113 Kenmore Dishwasher - Parts

This water inlet valve should be located behind the lower kick plate panel in either the right or left corner. The attaching solenoids on the valve open and close according to the desired amount of water needed.

If your dishwasher has started leaking, there may be an issue with the door seal. This genuine OEM replacement part measures approximately 22 inches long and 2 inches wide. The seal is made of plastic...

The heater element is located in the bottom of the dishwasher. It is used to maintain the temperature of the water during the wash cycle and to dry the dishes afterwards. If your dishes are not coming...

This genuine OEM filter is found under the lower spray arm in the bottom of your dishwasher. It is used to trap debris and prevent it from entering the pump. If your dishes are not properly cleaned or...

This hose clamp extends from half an inch to an inch in diameter. It is made entirely of metal and is intended for use with Maytag brand washing machines.

This seal is attached to the inner cabinet to reduce noise.

This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...

This part is used to hold the access panel in place. Sold individually.

If your dishrack is difficult to roll in and out of your dishwasher, you may need to replace the rollers. This dishrack roller is a genuine OEM part that is gray in color and made of plastic. The asse...

This drain hose is 6 and 1/2 feet.

This dishwasher door spring is sold individually. It is recommended if you are replacing one side, to replace both.

NOTE: This part has been redesigned, it may appear different but will still function the same as the original.