Models > 6651581591 > Instructions

6651581591 Kenmore Dishwasher - Instructions

Jump to:

All Instructions for the 6651581591
121 - 135 of 255
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Nate from Fort Worth, TX
Parts Used:
WPW10509257
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Water Seeping From Under/Around The Door
I opened the door and pulled the gasket from around the dishwasher. The gasket does not have any adhesive around it, so it pulled free almost immediately. The new gasket was pressed into place around the door and I was done. It couldn't have been any easier. I suspected it was the gasket when I saw pinched portions that did not return to the original shape and there were no visible cracks in the machine.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Carolyn from Keithville, LA
Parts Used:
WPW10509257
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
leak in dishwasher
This was an easy fix. My husband took out the old gasket and put the new one in. It fit perfectly and no more leak. The part got to us really quickly too and that was nice. No more hand washing the dishes! :)
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Phillip D from Auburn, AL
Parts Used:
4387043
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Latch had broken on detergent dispenser cover
Remove retainer that holds door color slide in front of door & then remove the slide. Remove cardboard backing, remove electric latch release, remove latch & replace with new one. Open door & slide out the cup dispenser cover pin & spring & replace with new ones. This was all straight-forward & simple.
8 of 26 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Raymond from Beach, ND
Parts Used:
WP661566
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Clean light was flashing and washer would not start
Replaced heating element and high limit thermostat. Was suppose to fix the problem but did not. Replaced the control board and works now. All of these are easy to replace.
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Roy from matteson, IL
Parts Used:
WPW10509257
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers
leaking
put new seal in and it still leaked!hum
1 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Michael from Las Vegas, NY
Parts Used:
4387043
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
soap door hinge broke
I took the pin and i slide it through the first hole attached the spring then sldie it through the second hole and snap the cover on
4 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Marjorie from North Grosvenordale, CT
Parts Used:
WP3369769
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Didn't look good with the new big panel changed.
Came home and my husband had it all done. He said it was simple and it looks bran new again. Very satisfied.
0 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Nicole from Newnan, GA
Parts Used:
4387043
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
The previous rod holding the cup in place broke
Remove completely the old one and installed the new entire kit.
2 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
mark from ickesburg, PA
Parts Used:
WP3368999
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Long spring broke that pulls soap cup open
Opened the door by using a star screwdriver. Pulled the door inside from the outside. Located the broken spring, put in new one (be very carefull to see how the insides are put together..makes life ALOT easier), and carefully put back together.
5 of 23 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
craig from Columbia, TN
Parts Used:
4387043
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
was just missing the door and spring
You slide the pin that holds the door in the first hole. then you slide the spring in next. The you slide the pin through the last hole. After that you gently push the door onto the pin till it snaps into place. And your done.
4 of 21 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
bryant from melbourne, AR
Parts Used:
WP3376397
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
dishwasher was overflowing
dropped the new float in, works like a charm
12 of 58 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Karolyn from Wellington, FL
Parts Used:
WP304170
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Super Fast Shipping
The part arrived the next day with regular postage, outstanding service.
7 of 64 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
ARNADENE from GASTONIA, NC
Parts Used:
W10728160, WP3368629
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Rust on tines
Went really easy, just locked into place!
Was this instruction helpful to you?
Thank you for voting!
Customer:
Patricia from Howell, MI
Parts Used:
WPW10509257
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
replaced door gasket
I watched the video that you had on line and the repair was done in a snap. The shipping was fast also.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Gerald from Millbrae, CA
Parts Used:
WP302711
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Water leaking from the right front of appliance
The repair was simplicity itself. Remover the sprayer arm, removed the torx screws, replaced the seal, and reversed the process of disassembly. When I found out where the dishwasher was leaking from, I called KitchedAid and was ready to replace the overflow float. The part was 42.00 and wouldn't have fixed the problem. When I found this web site and read other peoples experience, I checked the pump seal, and it was obvious that it had blown out. That saved me a Loy of time and money.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 6651581591
121 - 135 of 255