Models > 665KUDI23BWH0 > Instructions

665KUDI23BWH0 Kenmore Dishwasher - Instructions

Jump to:

All Instructions for the 665KUDI23BWH0
121 - 135 of 262
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Terrance from Burlington, VT
Parts Used:
4171544
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Hose was badly cracked from old age
I removed the upper rack from the dishwasher by popping the two rack track stops out of the rack tracks. The old tube came off easily, and the new tube went on very nicely, after lubing each end with a dab of liquid dish soap. I put the rack back on its tracks , popped the track stops back in and my dishwasher was back in business.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Richard from Sharon, PA
Parts Used:
4171221
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
cap broke
screwed it in. Closed the door. Voila, it works!
3 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Ricky from Lowell, OR
Parts Used:
4171544
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Worn Water delivery tube
Took the part to the rental house and took the old water delivery tube off by hand and installed the new water delivery tube by hand , it took less than 10 minutes and exactly the right part.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Mickey from Concordia, KS
Parts Used:
4171544
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tube cracked
Put a little liquid dish washing soap on the inside of the tube, it slipped on very easily.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
James R from Springfield, MO
Parts Used:
4171544
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
rubber water tube disintegrating
I ran the tube under warm water and it was very easy to connect. I would have done it a lot sooner if I had known how easy it would be to find the part and install it.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Mike from Oakland, CA
Parts Used:
4171544
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Water delivery tube to overhead sprayer punctured from age
I removed the roll out top wire rack of the dishwasher, turned it over and pulled the old punctured water supply tube off the force fit connectors on each end. I put a small amount of vaseline lubricant immediately inside the mouth of the new tube at each end. I pressed the ends of the new tube over the force fit connectors and tested them by shaking the pipe. I replaced the rack and fastened it into place.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Barbara K. from Lorain, OH
Parts Used:
4171544
Difficulty Level:
A Bit Difficult
Total Repair Time:
Less than 15 mins
Hose kept slipping off - stretched out of shape from use and age.
Used a heat gun (or hair dryer could probably work)to stretch the ends of the hose to slip over areas to connect.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Sherrie from Mount Kisco, NY
Parts Used:
4171544
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Cracked water delivery tube
Replaced the tube. It was relatively easy although it did take a small bit of squeezing/reshaping the newer rubber tubing to get it to fit on the outlet (it was a bit snug.)
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Kay from Quitman, TX
Parts Used:
WP4162322, 4162321
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
broken wheel
The hardest thing was getting the old one off and easy snapped the new one on
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Elwood from Battlecreek, MI
Parts Used:
4171544
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
the delivery tube was worn out with holes
the tube slid off and I used some liquid soap to spread on the end of each tube and I slid the new tube back on with ease and the upper rack of dishes now get cleaned/rinsed.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Alfred C from Mt Pleasant, PA
Parts Used:
4171544
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Part leaked due to a crack. & top rack dishes not being cleaned properly
Removed the old part. It came out with no problem
due to being brittle and cracked. This part was original to my 15 1/2 year old dishwasher.

Ran hot tap water in the sink and soaked the new "Rubber Water Delivery Tube" for about 5 min. I put a little dish washing liquid on dishwasher part where tube was to be slid onto. Including the soaking time,repair took less than 5 1/2 min.

I'm very pleased by the fact that my part arrived in a little over 1 1/2 days.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
John from Marietta, GA
Parts Used:
4171544
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tube was worn out. Burned out really.
Was lucky the part was available. I put liquid detergent on both ends of tube, then slid each end onto each sleeve. Works great now!
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Royal from Elgin, IL
Parts Used:
4171544
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
The old rubber water delivery tube was cracked and leaking.
I removed the old tube. I rubbed vegetable oil on the inside of both ends. The new tube slipped on with no
problem, and that was the end of the repair.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
anne from clinton, MS
Parts Used:
4171544
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Rubber Hose Had Holes In Itt
I heated both ends of rubber hose and applied a small amount of vaseline inside of tube and it slid on real easy. It took less than 5 minutes to finish the task.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Bill from Chelan, WA
Parts Used:
4171544
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
The old peice was wore out and had holes and kept falling off.
I just put 1 drop of hand soap in each end of the new hose , that let it slide on EZ.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 665KUDI23BWH0
121 - 135 of 262