66516273402 Kenmore Dishwasher - Parts

This part is used to connect the electronic control board and the touchpad control board.

This part is located between the console and the door.

This transport wheel is for dishwashers and attaches to the base of the dishwasher and allows you to roll the dishwasher into the cabinet during installation. Sold individually.

Water is supplied to the lower wash arm via the pump assembly.

Screws NOT included.

The overfill standpipe nut attaches the dishwasher float to the overfill standpipe

This part is sold individually. They are located on the upper rack, two being required for each side. These parts help to postion the rack adjuster on the side of the dishrack.

As per the factory, the hole for the thermistor should be 31-31.5mm. This works in conjunction with the pump and filtration system. It is used to receive drainage for disposal.