66514219K901 Kenmore Dishwasher - Parts

This hose is used to drain the water into your sink.

This track attaches to the inside of the tub for the upper rack to glide in and out.

16ml

Sold individually. The size of this screw is 1/4" hex head and 10-12 x 1/2".

Sold Individually. This is what your door spring would hook into and it prevents the metal spring from rubbing against the metal on the side of the door.

Located at the bottom.

This dishwasher heating element is not designed to heat the water that enters it, but is designed to maintain the heat of the water that enters the dishwasher. It is located on the bottom of the dishwasher.

This is the pump housing only.

Water that fills your dishwasher lifts this float, and when it reaches a certain level, it acts as a trigger for the float switch. The float triggers the float switch to shut off, thereby shutting off...

This part is used as a safety device to protect the dishwasher circuit from overload. If the temperature gets to high it will shut off the electrical current to the heating unit in the appliance.