66513964K011 Kenmore Dishwasher - Parts

The tine row is located on the lower dishrack. The tine row can be raised or lowered to provide more room in the lower dishrack. Over time the tine row can become rusted, damaged, or lost, and will ne...

Sold individually. Used with the heating element.

The heater element is located in the bottom of the dishwasher. It is used to maintain the temperature of the water during the wash cycle and to dry the dishes afterwards. If your dishes are not coming...

This gray lower dishrack fits select Whirlpool, KitchenAid, Maytag, and other compatible dishwashers. It holds dishes securely during wash cycles and is ideal for replacing racks that are damaged or r...

This water inlet valve should be located behind the lower kick plate panel in either the right or left corner. The attaching solenoids on the valve open and close according to the desired amount of water needed.

If your dishwasher has started leaking, there may be an issue with the door seal. This genuine OEM replacement part measures approximately 22 inches long and 2 inches wide. The seal is made of plastic...

This genuine OEM filter is found under the lower spray arm in the bottom of your dishwasher. It is used to trap debris and prevent it from entering the pump. If your dishes are not properly cleaned or...

This detergent dispenser assembly is for dishwashers. Detergent dispenser assembly holds the dishwasher detergent and rinses agent in covered compartments.

This seal is attached to the inner cabinet to reduce noise.

This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...

If your dishrack is difficult to roll in and out of your dishwasher, you may need to replace the rollers. This dishrack roller is a genuine OEM part that is gray in color and made of plastic. The asse...

This drain hose is 6 and 1/2 feet.