6651743591 Kenmore Dishwasher - Parts

Sold Individually. This is what your door spring would hook into and it prevents the metal spring from rubbing against the metal on the side of the door.

This dishwasher heating element is not designed to heat the water that enters it, but is designed to maintain the heat of the water that enters the dishwasher. It is located on the bottom of the dishwasher.

Have to be installed with adhesive which is sold separately.

This part goes at the end of the rail to stop the dishrack from falling out.

This is the pump housing only.

This screw is sold individually.

Water that fills your dishwasher lifts this float, and when it reaches a certain level, it acts as a trigger for the float switch. The float triggers the float switch to shut off, thereby shutting off...

This screw is sold individually. Size: 8-32 x 1/4 inch.

This part is used as a safety device to protect the dishwasher circuit from overload. If the temperature gets to high it will shut off the electrical current to the heating unit in the appliance.

This spray arm is located on the lower half of your dishwasher. Water is forced through this spray arm by the unit's pump and motor assembly. The force of the water propels the spray arms, spraying wa...