66514793N511 Kenmore Dishwasher - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Lena from Napoleonville, LA
- Parts Used:
- 8269144A
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Wrench (Adjustable)
Leak in hose
Turned water off. Removed dishwasher from under the counter, replaced hose, reinstalled dishwasher under the counter.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Sheldon from LOS ANGELES, CA
- Parts Used:
- WPW10546503
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
The instructions were not clear and had no illustrations
I just looked at the matching piece on the other side of the rack and used it as a guide to install the new part.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Tasha from ELDON, MO
- Parts Used:
- W10847918
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
The cover to the power box gotosplaced during above and change of power cord
It has brackets that slipped right into the box. The hardest part was reattach the entire box to the side of my dishwasher.
I do feel anyone could do this repair
I do feel anyone could do this repair
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Joseph from FRANKFORT, IN
- Parts Used:
- WPW10588164, WPW10250162
- Difficulty Level:
- Very Easy
- Total Repair Time:
- 30 - 60 mins
Simple separation of the parts
The 2 parts snap together .
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Bill from Palm Bay, FL
- Parts Used:
- WPW10082853, W10728160
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
Ice maker 'auger' motor would not turn
Followed You Tube video to open up ice maker, remove and replace auger motor, put it all back together = 12 screws, three assemblies, very easy.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Elizabeth from LITCHVILLE, ND
- Parts Used:
- WPW10546503
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
Top rack slider piece broke
I replaced the holder that connects the top dishwasher rack on the drawer slide. I took it apart carefully so I could remember how to assemble everything back. I did have trouble for a few minutes to get it clipped and I checked the opposite side. After I pondered it for a few moments and did a couple of trial runs at it, it magically slid into the slot, the other did, too, and it was good to go. So very, very pleased!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Mike from YAKIMA, WA
- Parts Used:
- W10807920
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
The new door gasket would not stay in place after installing the new one.
1. Purchased grout adhesive with a high temperature rating.
2. Purchased meat injection syringe. (The gasket channel is too narrow and deep for normal application) Modify the syringe needle to fit the channel. Remove the two dishwasher trays for easy access to the channel.
3. Place a bead of grout into the channel, do NOT fill the channel.
4. Insert the gasket properly into the channel.
5. Clean up any excess grout.
6. Close the door and wait 24 hrs. before opening.
7. Return the dishwasher trays to the machine.
Happy wife Happy life
2. Purchased meat injection syringe. (The gasket channel is too narrow and deep for normal application) Modify the syringe needle to fit the channel. Remove the two dishwasher trays for easy access to the channel.
3. Place a bead of grout into the channel, do NOT fill the channel.
4. Insert the gasket properly into the channel.
5. Clean up any excess grout.
6. Close the door and wait 24 hrs. before opening.
7. Return the dishwasher trays to the machine.
Happy wife Happy life
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Johnny from LEVITTOWN, PA
- Parts Used:
- WP302868
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
Lost Screws from lower access covers for my Dishwasher
Reassembled lower access covers using the new screws purchased from parts direct, perfect fit replacement. Hardest part remembering how they fit Dishwasher.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- mary from WILLCOX, AZ
- Parts Used:
- W10807920
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Worn silverware drawer
Perfect match
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Susan from Bath, ME
- Parts Used:
- W10728159
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Bought lower rack, but discovered we didn't need it. Ordered the tine rack instead.
Our experience was amazing. The part itself simply needed to be replaced: dropped into the lower rack and it was done. The amazing part was the wonderful service that this site provided. We discovered our initial mistake, contacted the company, and received instructions for how to return it. Then we ordered the tine and it was sent immediately. Just received confirmation that the returned lower rack had been received, so the process is complete to our great satisfaction. This site really has it down for providing excellent customer service. They are terrific!! Thank you!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- john from Drexel Hill, PA
- Parts Used:
- W11177741
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Original door seal came out while emptying dishwaher. It was pretty messy so i ordered a new one.
I just followed the directions on the video that was part of the pictures for the door seal. I made sure that the channel was clean and the new seal pressed right in. i wish I had checked this site before I called a repairman, who wanted to charge me over $400 for a new one.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- K A from WESTLAKE, OH
- Parts Used:
- WPW10195417
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Wheel of lower rack snapped off. After repeated attempts to put back on, decided to replace the assembly. There are actually 4 assemblies on the lower rack
Placed the entire drawer on the kitchen counter. Plastic part came off. New one installed in less than 10 seconds.
Piece was expensive but not nearly as much as a dishwasher repairman!!
Piece was expensive but not nearly as much as a dishwasher repairman!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jeanne from FAYETTE, OH
- Parts Used:
- W10728160
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Tine on rack was rusted and needed to be replaced.
Just replaced it in the notches that held the rusted tine.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Dominic from AURORA, IL
- Parts Used:
- WPW10195417
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Old wheels were falling off
Very simple. Snapped the old wheel assembly off. Then snapped the new wheel assembly on. Done!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- John from WALDORF, MD
- Parts Used:
- WPW10195417
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Wheel detached from original part
Still waiting for part. Shipped 23 April. FedEx rerouted from Northampton PA to Chicago 4/30. Scheduled to be delivered 5/11 by end of day. Plan is to replace assembly.
Was this instruction helpful to you?
Thank you for voting!