5871430591 Kenmore Dishwasher - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- William E from High Point, NC
- Parts Used:
- 154106202
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers, Wrench (Adjustable)
Broken heating element brass nut
Ditto the other comments. Easy, great savings. Perfect. Thank you!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- william from sun city, CA
- Parts Used:
- 154106202, 5300806833
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Socket set
leaking water from heating element
first I shut off power at breaker then took off bottom panel,removed old nuts had a problem with the 1 in the back had to remove a few wires to be able to reach in.Then i open door removed dishwasher rack and heater element notice that the hole was rusted out a little so I cleaned area up and used permatex silicone all the area installed the new grommets replaced the heating element put it all back together will test for leaks after silicone cures
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Steve A. from Lake Mary, FL
- Parts Used:
- 5300809018
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
Plastic bolt strips
This dishwasher has a plastic bolt that holds the actuator on. The action loosens the bolt and it wobbles and eventually comes off. After enough attempts the bolt will strip and need to be replaced. I took some 3M loctite this time to hold it in place. It is 24 years old, but still kicking
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Keith from Meansville, GA
- Parts Used:
- 154106202
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Wrench set
Dishwasher leaking from underneath unit
Spotted the source of the leak at the first heating element under the dishwasher. Removed the brass mounting nut and it was cracked. Replaced with new part from PartSelect.com and the leak was fixed. Apparently the heating element gets so hot it tends to crack the mounting nuts, which results in a leak. Delivery time for part said 3-5 days - mine arrived one day after ordered!
Was this instruction helpful to you?
Thank you for voting!