66513923K014 Kenmore Dishwasher - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- david from escondido, CA
- Parts Used:
- W10619006
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Latch broke on dishwasher door
I removed the screws on the inside of the door. Removed panel from the outside. Disconnected the power wires to the panel. Disconnected the wires to the latch switch. Removed the latch assebly. Put new assembly in place. Connected swtich wire. Connected panel wire. Put panel back on dishwasher door. Installed panel retaining screws. Job Complete!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- perry from casselberry, FL
- Parts Used:
- W10402110
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
dishwasher stopped working in the sanitize wash cycle
I tried to reset the breaker but still no function, I removed the door panel and the control panel , I located the thermal fuse located under the white cover that protects the main board, I turned off the breaker and checked the fuse for continuity using my multimeter, I found the fuse was showing being open, or blown, I removed the fuse and inspected the contacts and the main board, l replaced the fuse and followed the instructions that came with the fuse kit, I then reset the breaker , I had washer function but it wouldn't operate properly, bad control board, a lemon.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ronald from Lansing, MI
- Parts Used:
- WPW10352582
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
Washer was non-functional
Determined that main control board was not providing power to control functions. Replaced board with new level of board that was a substitute for the original part.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- DANIEL from DOVER, DE
- Parts Used:
- W10402110
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers, Wrench set
Dish washer would notstart. No elect power
First turn off power to the dishwasher at the circuit breaker! Check the door panel screws they were star screws which I was able to remove with an allen wrench(more difficult). Follow the instruction included in the Fuse package. Follow and understand each step before doing the task and it will go smoothly.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- phil from santa rosa valey, CA
- Parts Used:
- W10619006
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Screw drivers
Kitchenaid Dishwasher Wouldn't Turn On
Replaced latch switch with parts-select whirlpool (usa) model (good choice) and unit still wouldn't turn on. I then turned 115 vac power off to unit for 1 minute and then back on and unit worked correctly with no additional problems. .
Was this instruction helpful to you?
Thank you for voting!