JDB1255AWB1 Jenn-Air Dishwasher - Instructions

I removed the screws from inner door panel.The 2 top screws also hold the latch assembly in place.I then lifted the panel, removed latch assembly, unplugged the 2 wires ,then installed new part in reverse order. Reinstalled screws in inner panel. Oh yes,first turn off power first at breaker box.

Pulled out the dishwasher and disconnected two power wires to heater, turned off the two hold-down nuts and removed old heater. I then installed the new heater in reverse.

n/a

We unscrewed the inner door panel and pulled it apart, disconnected the wiring, removed the screws holding the dispenser in place and swaped it out. One problem we had putting everything back together was that the latch for the door didn't line up and we couldn't shut the door but we simply unscrewed the door, readjusted the latch and put it back together. Works great now!

It was very simple and easy. I opened the panel inside the door; total of 8-10 screews. The latch has two electrical connections and switches. The replacement part I got came with an extra set of switches. Replacing the switches needed an electrical tool which I don't have so I decided to keep the old ones. It is quite easy to take out the switches and replace the latch. I should have taken out the power; but I did not. I was just careful handling the wires et al; no big deal either. My dishwasher is working fine now. I was able to fix it within $40 and 1 hour of effort. Any technician would have cost me atleast couple of hundred bucks + parts etc.

Went fine..video made it easy..one of the best instructional

Remove mid and bottom rack. The nut on the bottom spray arm can be removed by hand; all screws are T-20; just hold on to the impeller to turn its screw. I keep a T-20 under the sink, which tells you something about how reliable we've found this model! Remove screws as you go down, replace parts as you go back up; assembly is reverse of removal, yadda, yadda. Don't miss opportunities to notice how Maytag keeps making small improvements to many of the parts, wonder whether in a few more years of purchasing replacement parts for this thing it will finally stop breaking. My wife informs me that plastic mesh filters like Maytag uses are something she buys for her lab as disposable single use items. We actually had a Bosch on order (metal filters) but I decided to give this unit one more infusion of parts. It's working better now, but I don't know how long it will last before something else gives out.

I called for a Lowes where I purchased the dishwasher was told it was out of warranty, they set up for a repairman to come out and fix it. He came out and told me it would be $190.00 for parts and labor but that didn't include the service call of $60.00 dollars. Total bill would be $250.00, plus it would be another 2 weeks before he would be able to get back because he had to order the part but and get this I would get the part delivered to the house before the two weeks, and that he wouldn't guarantee the part for more then 90 days.
I told him no way, so I researched the internet and found this site part cost $25.00 dollars my time about 30 min. SAVINGS of $225.00.
The part was pretty easy to install had to take out a few screws around the edge. Only trouble I had was putting in the handle but I figure that out and put everything back together again.
I would purchase parts from this company again had it within 2 days, at a very reasonable cost.

Found just the replacement I needed... for about half the cost! Thanks for the savings...

The two replacement wheels arrived very quickly. It was so easy to install. All I had to do was snap the old ones out and snap in the new wheels. Very fast and easy! Good company to purchase from.

Took out the old, put in the new. Thank you.

The one I got wasn't exactly the same but it fit and does the job just like the one that broke.

Just took the basket out of the box and put it in the disjwasher.

Hello guys...this is really too easy to report!

Took the old one out, put the new one in it's place