JDB1255AWP2 Jenn-Air Dishwasher - Instructions

Took old one out And placed new one in dishwasher.

It was easy. We removed the handle from the old basket and put in on the new and set it in place. Wonderfully easy.

just replaced the basket. Simple enough but the best thing was the speed I received the part.

Just inserted new basket - used butter knife to remove handle from old basket so it could be inserted on new basket. It was helpful to see comments left by others that they had same problem with their baskets and how one used a knife to remove old handle. That was a helpful hint.

No repair - just replaced basket. Although picture on site made the basket look light gray, which is color of our dishwasher interior but the new basket ordered is very dark gray.

Hi, Not really a "repair," but a replacement. The part came quickly, was what I needed. Done.

I put the silverware basket in the dishwasher. Unfortunately, I also purchased a cover and handle thinking they were needed. Now I need to see about returning the extra parts or just eat the cost.

This couldn't have been easier. After unsnapping the docking station from the dishwasher, I aligned the two flapper valves that come with the unit and pressed them into place. I then pushed the new unit into place by pushing first on the left side and then the right until it clicked into place.
I looked at the old one and found that one flapper was gone and the gaskets were deteriorated. What made the whole process easier was buying from PartSelect. I have bought from them before and will again.

n/a

We unscrewed the inner door panel and pulled it apart, disconnected the wiring, removed the screws holding the dispenser in place and swaped it out. One problem we had putting everything back together was that the latch for the door didn't line up and we couldn't shut the door but we simply unscrewed the door, readjusted the latch and put it back together. Works great now!

Pulled out the dishwasher and disconnected two power wires to heater, turned off the two hold-down nuts and removed old heater. I then installed the new heater in reverse.

Went fine..video made it easy..one of the best instructional

Remove mid and bottom rack. The nut on the bottom spray arm can be removed by hand; all screws are T-20; just hold on to the impeller to turn its screw. I keep a T-20 under the sink, which tells you something about how reliable we've found this model! Remove screws as you go down, replace parts as you go back up; assembly is reverse of removal, yadda, yadda. Don't miss opportunities to notice how Maytag keeps making small improvements to many of the parts, wonder whether in a few more years of purchasing replacement parts for this thing it will finally stop breaking. My wife informs me that plastic mesh filters like Maytag uses are something she buys for her lab as disposable single use items. We actually had a Bosch on order (metal filters) but I decided to give this unit one more infusion of parts. It's working better now, but I don't know how long it will last before something else gives out.

Found just the replacement I needed... for about half the cost! Thanks for the savings...

The two replacement wheels arrived very quickly. It was so easy to install. All I had to do was snap the old ones out and snap in the new wheels. Very fast and easy! Good company to purchase from.