JDB1250AWB Jenn-Air Dishwasher - Parts

This kit includes the dishrack, clips, wheels and silverware basket. As per the manufacturer this kit no longer includes the tines.

THE COURSE THREADED SLEEVE IS NLA SO THE KIT SHOULD NOW ONLY HAVE 1 SLEEVE 07/18KC UPGRADE TO NEW MOTOR WHICH CONTAINS SHAFT W10118627 1/14KC

This part provides a waterproof seal between the tub and the door. Also known as Gasket.

This adjuster connects to the right hand side of the top dishrack. It is used to change the height of the upper rack.

This ball bearing is a genuine OEM replacement part for your dishwasher. This part consists of one ball bearing. The ball beaaring is used in the upper dishrack roller to make it slide out with ease. ...

The docking station is located on the water supply tube at the far back. It provides water to the upper and middle spray arm and also includes the flappers.

This part releases the detergent and rinse aid into the dishwasher.

Water that fills your dishwasher lifts this float, and when it reaches a certain level, it acts as a trigger for the float switch. The float triggers the switch to shut off, thereby shutting off the f...

This adjuster connects to the left hand side of the top dishrack. It is used to change the height of the upper rack.

This dishwasher heating element is not designed to heat the water that enters it, but is designed to maintain the heat of the water that enters the dishwasher. It is located on the bottom of the dishwasher.