Models > CL700 > Instructions

CL700 Insinkerator Dishwasher - Instructions

Jump to:

All Instructions for the CL700
1 - 15 of 15
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Steve from Dublin, CA
Parts Used:
4172040
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers, Socket set
Dishwasher would not come on - broken Door Switch Actuator
In diagnosing the problem, I pretty much took the entire door apart before observing that the door switch actuator was broken off ... I went online, logged onto PartSelect, found the appropriate diagram (which on their site is quite easy to do) and ordered the part online.

It arrived far quicker than I would ever have imagined possible and I had it installed within 2 minutes of the time I opened the package.

MrsS is VERY happy now that her dishwasher is 'back on the road'

It was a very small and inexpensive part, but PartSelect treated us as well as if we'd spent hundreds of dollars ... we could not be happier.
15 of 23 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Lowell from Salem, OR
Parts Used:
4172040
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
The switch had broken off
PartSelect web page helped me determine the problem and the solution. It took me longer to read the fix-it directions than it did to fix the dishwasher. Just push the part in the hole and twist. When my wife got home she was so impressed that it was fixed and we didn't spend a huge amount to have a repairman come to our house. I got so much prasie that I didn't tell her how easy it was to do the repairs
7 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Dr. B. W. from Coatesville, PA
Parts Used:
4172040
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
actuator pin broke off
pulled old actuator base off, followed instructions on how to install new actuator - followed them -
piece of cake.

Thanks
7 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
ELLEN from TUSCALOOSA, AL
Parts Used:
WP4162322
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
dishwasher rack rusted
It was easy to remove rack from dishwasher. I screwed on rollers and it was like new!
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
ernest from durham, NH
Parts Used:
9740712
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Wrench set
washer wouldn't turn on
Took front control panel off and discovered that door interlock switch was mechanically damaged. Repaired with epoxy but realized it was only temporary fix. Searched and found the replacement on PartSelect, after install, washer works fine.
4 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Janice from NEW COLUMBIA, PA
Parts Used:
WP4171544
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
water delivery tube was rotted and no longer delivered water to the top arm, so top shelf of dishwasher no longer worked
we used hot water to soften the ends of the tube and then slid it onto the two ends of the parts in the dishwasher. It did take a little bit of "push" to get it on one end, but nothing we could not handle. I would say anyone with common sense and willingness to fix something them selves would have no problem. I would like to say the part I ordered was of good quality and saved me a lot of money.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Judy from SCRANTON, PA
Parts Used:
WP4171544
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Dry rotted water delivery tube
I put a whirlpool tube on my Jen more dishwasher . Fits like a glove.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Linda from GARLAND, TX
Parts Used:
WP4171544
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
water delivery tube had rotted over time
followed the tutorial video and just removed the old one and the new one slipped right on.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Allen from NAUVOO, AL
Parts Used:
WP4171544
Difficulty Level:
Really Easy
Total Repair Time:
1- 2 hours
Old tube had disintegrated from age
ReplacING the tube was not a big job but the old tube had come apart and pieces had lodged in the sprayer arm. I used a toothpick and nut pick to dislodge the pieces and restore full water flow.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Patricia from PISCATAWAY, NJ
Parts Used:
WP4172117, WP4162322, WP4162321
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers
Needed new lower rack in my Kitchenaid dishwasher
Woman who took my order suggested buying extra wheels, just in case we broke one. Good suggestion, we broke two in getting them off the original rack. Soaked the wheels and adjusters in hot water for 10 minutes as someone else suggested in notes. All went well, got a nice, new rack!
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Kim from DALLAS, TX
Parts Used:
WP4171544
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Replace rubber water delivery tube
Like the video showed but very hard to stretch tube over wider part on interior of top shelf. Read afterwards that hair dryer would have helped. Video should mention that. Bruised hands and wrists getting it on good.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Anita from CAPE MAY, NJ
Parts Used:
WP4172117
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Replacement for rusting 40 yr old rack
Tranfered wheels from old rack to replacement rack. Silverware caddy was a bit too big for the replacement. I gently bent the prongs on the rack a little and its fits perfect.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Allen from MOUNT VERNON, WA
Parts Used:
WP4160355
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Replacing broken door hinge guide bearing sleeve
Repair was awful without instructions. Instructions were requested twice with no response. Attempted without instruction and broke the sleeve. Reordered but not through Partselect
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Mark from Norman, OK
Parts Used:
WP4162568
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Detergent dispenser failed to open
Removed the door cover and replaced the bi-metal.
5 of 22 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
David from Carlisle, PA
Parts Used:
WP4162568
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
Soap Cup Lid was not opening during main wash cycle
Very easy. Disconnect power to the dishwasher via a breaker or fuse. Open the door and remove just the 4 screws on the inside lip of the door. Do not remove the screws hoding the closing brackets. Remove the front glass and chrome panel between the control panel and the kick panel. This will give you access to the soap cup and bi-metal. Remove the one retaining screw and remove the bi-metal,taking note of the position of the wires. Remove the wires, by grasping the connectors (I used needle nose pliers for this), not the wires, and re-intsall them on the new bi-metal. Re-install bi-metal on soap cup assembly, "cock" the release lever by closing the soap cup cover and manually trip the bi-metal to make sure it will release the lever and open the cover. Re-install the front panel with screws. Restore power and test appliance.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the CL700
1 - 15 of 15