Models > SU24P3WTLA > Instructions

SU24P3WTLA Gibson Dishwasher - Instructions

Jump to:

All Instructions for the SU24P3WTLA
1 - 3 of 3
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Jack from Soddy Daisy, TN
Parts Used:
5308016252
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Leaked Water
First I removed the old seal and comparied it with the new one and they were the same.
Then my wife put the new seal on. I helped her on the corners, very little. She did a very good job and it does not leak now.
15 of 25 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Tim from Forest Grove, OR
Parts Used:
5300805255
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
No Rinse cycle
Removed the front panel below door, 4 screws. Removed 1 screw that help relay on frame. Moved 3 wires from old relay to new. Installed relay to frame, installed panel and done.
3 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Calvin from LOVINGTON, NM
Parts Used:
5304509753
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
No problems encountered
There were 4 zip ties holding old silverware basket on to bottom rack snip them, remove basket install new basket with zip ties both ends 2 more in middle about 1-2” apart. Try to install ties about 1/2 way up on basket so it doesn’t get top heavy.
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the SU24P3WTLA
1 - 3 of 3