422914 General Electric Dishwasher - Parts

This push on nut is for your dishwasher or refrigerator. As the name suggests, it pushes into place, rather than being screwed in. It is approximately half an inch in diameter and is made of stainless steel.

This upper dishrack assembly holds dishes and cups in the top section of the dishwasher. It includes the rack and wheels for smooth sliding. Replace it if the original is damaged or not holding items ...

This part helps keep the rinse aid the dispenser until its needed.

The hinge link on your dishwasher connects the spring to the dishwasher door hinge. If the hinge link becomes cracked or damaged, you may not be able to shut or lock your dishwasher door properly. In ...

This upper track roller kit comes with a screw for easy assembly.

This dishwasher pump and motor kit is a comprehensive replacement solution for various models manufactured since 1970. The redesigned assembly includes a built-in drain solenoid, streamlining installa...

This valve opens in order for the water to drain out of the dishwasher.

This kit includes the armature and linkage assembly.

This connector has female threads.

This water inlet valve is specially designed for those dishwashers that fit under the counter from 1974 To Present. The valve should be located behind the lower kickplate panel in either the right or ...

This part is the replacement sump housing or sump insert for your dishwasher. It is made of plastic and is approximately 7 inches by 5 inches. The sump housing is attached to the bottom of the dishwas...

This part comes with the telescopic tower.