Models > 412101191 > Instructions

412101191 General Electric Dishwasher - Instructions

Jump to:

All Instructions for the 412101191

Customer:: Don from Mount Vernon, IL
Parts Used:: WD15X93
Difficulty Level:: Easy
Total Repair Time:: 30 - 60 mins
Tools:: Nutdriver, Screw drivers, Wrench set

Insufficient fill water, dishes not getting clean (valve diaphram had ruptured)

1. Remove lower cover skirt.
2. Shut of water at undersink valve.
3. Unplug power cord or turn off circuit breaker.
4. Disconnect water supply line from fill valve.
5. Unplug the electrical connector from the valve.
6. Remove the 2 valve mounting bracket screws.
7. With loose valve in hand, rotate to gain access to allow release of outlet hose clamp for hose removal.
8. Remove brass fitting from old valve and install on new valve. Use teflon tape on the pipe threads only.

Install new valve by reversing the procedure.

71 of 77 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Joseph from Elmendorf, TX
Parts Used:: WD28X265
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Basket was lost

Opened package from Parts Select.
Removed Silverware basket from package.
Opened Dishwasher.
Inserted Silverware Basket in rack.
Closed Dishwasher.
Discarded shipping package.
Told wife I fixed Dishwasher.
Sat down & had a beer.

49 of 52 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: ANNE from SWANNANOA, NC
Parts Used:: WD12X10284
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Lost Despenser Lid, Droped It And Havent Seen It Since.

Ordered the part, by using the diagram on the ge website identified the part and ordered it right them and when it came (delivered really fast) took it out of the bag and screwed it in the jet dry despenser and is working great.

26 of 31 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Thomas from Spring, TX
Parts Used:: WD28X31818
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Pliers, Screw drivers

My dishwasher stills works perfect, but most of the upright prongs on my upper dish rack had broken and fallen off. I couldn't see buying another dishwasher so I entered my model # on the Part Select Website. I was easy, and three days later the new one was delivered to my doorstep.

Replacing the rack was a "no-brainer". I simply removed the plastic keepers on the ends of the roller racks with a screw driver, pulled the old one out, slid the new one in, and then replaced the keepers with pliers. It couldn't have been easier.

18 of 19 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: William from Polson, MT
Parts Used:: WD15X93
Difficulty Level:: Really Easy
Total Repair Time:: 30 - 60 mins
Tools:: Pliers, Socket set, Wrench (Adjustable)

Little/no water coming in & dirty dishes

1. Remove access panel under door. 2.Shut off hot water.3. Shut off electric to washer.4. Disconnect water line from water inlet valve.5. Remove small outlet water line from valve. Replace valve & reconnect. OR !!! 1.Take solenoid valve & bracket off of original inlet valve 2. Pull out white plastic diaphragm cover. 3. Remove diaphragm & clean out water holes with a pin. 4. Reassemble valve. 5. Reinstall original water inlet valve & save $27.00

15 of 17 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Jim from Wichita Falls, TX
Parts Used:: WD28X31818
Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Tools:: Pliers, Screw drivers

After twelve years the prongs on the top rack began to break and rust.

I ordered a replacement from partselect.com and received it in just three days. The only difficult part was deciding how to remove the white plastic end caps on the sliding rails. Finally, I took a small screwdrive and pried out the crimps in the metal, pulled the old caps out, inserted the new ones, and squeezed the metal together again using needle-nosed pliers. Nothing to it!
Note: The configuration of the new rack isn't exactly like the original (size and placement of the prongs differ somewhat) but it fits perfectly and works great.

9 of 9 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Judy from Salem, OR
Parts Used:: WD12X10284
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Replace rinse aid fill cap

Opened the package and screwed in the new rinse aid fill cap. No problems. It fit and works just fine.

8 of 9 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Russell from Columbia, SC
Parts Used:: WD12X10284
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

threads broke on rinse aid fill cap

Replaced with a new rinse aid fill cap.

7 of 10 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Patricia from Clifton, NJ
Parts Used:: WD12X10284
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Dispenser cap would not stay in place because it had melted

First I opened the package and screwed the new dispenser cap into place.

5 of 7 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Albert from Dallas, TX
Parts Used:: WD15X93
Difficulty Level:: Really Easy
Total Repair Time:: 30 - 60 mins
Tools:: Nutdriver, Pliers, Socket set, Wrench set

Thanks for sending the correct part. You guys did a great job.

Just put the part on.

4 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: donald from fullerton, CA
Parts Used:: WD28X265
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Silverware basket was missing in the condo that we rented

I just plugged in the model number and a screen came up that showed all the part numbers that made up the model. picked out the parts that we needed and ordered it and within 2 day we had the new basket that we needed for our dish washer.
the service and ease was better that going to the appliance store and picking up the basket.
I was very happy the the service.
Donald Brown

4 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Ralph from McMinnville, OR
Parts Used:: WD12X10284
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Damaged rinse agent dispenser

Unscrewed old one and installed the new one.

7 of 15 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Pamela from HAMILTON, NJ
Parts Used:: WD28X31818
Difficulty Level:: Easy
Total Repair Time:: 30 - 60 mins
Tools:: Pliers, Screw drivers

rusting of stems on upper rack

The video was extremely helpful. Removing the tabs was easy. However, we struggled with the re-insertion. They did not "snap" back in as easily as seen on video. We ended up using a pair of pliers to push pieces into slot. We did not use very much pressure for fear of breaking the plastic. However, after many tries, we were successful & it works perfectly. Perhaps a close-up of the "snapping in" part might help future installers.

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Helen from Carol Stream, IL
Parts Used:: WD12X10284
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Rinse Aid Fill Cap melted because it landed next to the heating element because it wasn't screwed in

Simply screwed in new cap

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Jason from Porterfield, WI
Parts Used:: WD15X93
Difficulty Level:: Easy
Total Repair Time:: 30 - 60 mins
Tools:: Nutdriver, Screw drivers

No water during wash cycle.

Shut off water, disconnect power,remove
Faulty valve,install replacement part.

5 of 10 people found this instruction helpful.

Was this instruction helpful to you?

All Instructions for the 412101191