GSB2800E*115 General Electric Dishwasher - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Patrick from Hawthorn Woods, IL
- Parts Used:
- WD24X10018
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
Dishwasher was not draining.
The dishwasher would drain correctly 3 out of 4 times and the original part did not appear to be in bad shape. Decided to change anyway based on posted success rate in resolving the issue and the low cost of the part. After one month of daily operation the issue has been completely resolved. Could not have been any easier!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Bill from Fort Myers, FL
- Parts Used:
- WD28X265
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Lower rack had rusted through in several areas.
Pulled out the old and rolled in the replacement. The easiest part of the repair was ordering from the PartSelect website and receiving it via FedEx Ground the next day. Thank you PartSelect. Even my husband could have been successful with this.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Patricia from Loganville, GA
- Parts Used:
- WD28X265
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Bought a manufactured home
with a dishwasher. Someone had 'packed' the silverware basket and there wasn't one in my dishwasher! Ordered one from here, when it arrived, opened the box, opened the dishwasher and placed it in the correct place. Closed dishwasher - DONE!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- tway from columbia, MO
- Parts Used:
- WD28X265
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
replaced dishwasher rack
nothing to it. slid old one out, slid new one in. however, replacement was not the same model as the original.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Peter from Macon, GA
- Parts Used:
- WD24X10018
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Food particles left on dishes after every wash... Piston and Nut Assembly was completely worn out (disolved) and leaking dirty water back into the rack area instead of draining it.
Unscrewed 4 screws from the back, bottom of the rack area which hold the cover. Twist out the old Piston and Nut which is threaded to fit securely (needed some elbow grease to get the old one out). Twist the new part in and place the cover back in place with the 4 screws. Done. Dishwasher works like it was brand new. Cleanest dishes in the country... ;)
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Shirley from Stoughton, MA
- Parts Used:
- WD28X265
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
I was very disappointed in the in-the-door silverware basket most dishwashers are equipped with today and longed for the ones that have been phased out.
I went to PartSelect online and easily found an exact duplicate of my old basket at a reasonable price. I ordered it, expecting delivery in about 3 - 5 days. It was on my doorstep 2 days after the order was placed. I opened the dishwasher door, set it in the place of my choice, and what a timesaver! Try it! You'll like it!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Paul from Hopatcong, NJ
- Parts Used:
- WD24X10018
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
Dishwasher not draining completely
This was a piece of cake! Simply removed the rear drain cover with a nut driver and unscrewed the piston from its seat. I noted that the seal in the old piston had deteriorated over time. I rubbed a little petroleum jelly on the upper gasket of the new piston and simply screwed it into place, solving the problem entirely. Could not believe how quickly the part was delivered - next day!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Michael from Denver, CO
- Parts Used:
- WD24X10018
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers, Socket set
Dishwasher won't drain
Removed back screen, screwed out old piece, and replaced. Easy.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- David from Bradenton, FL
- Parts Used:
- WD12X10284
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Dishes cloudy, spotting
Unscrew old stripped out one and put in new one ..wala!! Easy repair for this old lady...
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- FRANCIS from WINOOSKI, VT
- Parts Used:
- WD28X265
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Old Basket Broke
Ordered a new basket it was a little large as I ordered the wrong size. I just broke of the tabs that held it in and now its perfect and larger !!!! Simple and great service !!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Courtney from Lancaster, PA
- Parts Used:
- WD24X10018
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
Dishwasher not completely draining
Followed the video on the website - seriously easy. took me 5 minutes and solved the problem!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- John from Absecon, NJ
- Parts Used:
- WD24X10018
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Socket set
Dishwasher Was Not Draining - Standing Water
Followed the video on this site, replaced part in under 10 minutes, ran a cycle - p-e-r-f-e-c-t !!! Thank you so much - I am sooooo not a diy type person, but this was easy!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Richard from Shreveport, LA
- Parts Used:
- WD24X214
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Socket set, Wrench (Adjustable)
water keaking fron tip of dishwasher around the showerhose
Laid dishwasher on its side to get to the bottom very easily, unscrew the screw that was holding the bottom of the hose to the dishwasher, then remove the 2 screws in the top of dishwasher that is holding the shower hose in placeinstall new hose in reverse, very easy .
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Barry from Wrentham, MA
- Parts Used:
- WD24X10018
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Pliers
Not draining completely/foaming out door
Watched the video, replaced the recommended part EASY-Done Would not hesitate on any other appliance repairs in the future Great site!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Scott Allen from Clarklake, MI
- Parts Used:
- WD24X10018
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Socket set
Standing Water In The Tub After The Wash Cycle Has Ended, The Problem Is A Worn Or Missing Rubber Seal On The Piston Nut Assembly, It Is Easy To Tell If It Is Indeed This Problem By Feeling The Pump Discharge Line When The Washer Is Draining You Should Be Able To Hear And Feel It Pump The Water Out
Took of the plactic strainer shroud unscrewed the piston nut assembly by hand installed the new one it takes longer to remove the shroud than it does to replace the part
Was this instruction helpful to you?
Thank you for voting!