Models > ZDT915SSJ2SS > Instructions

ZDT915SSJ2SS General Electric Dishwasher - Instructions

Jump to:

All Instructions for the ZDT915SSJ2SS
31 - 32 of 32
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Roberta from OCEANSIDE, CA
Parts Used:
WD28X35784
Difficulty Level:
Very Difficult
Total Repair Time:
1- 2 hours
Tools:
Screw drivers, Wrench set
Wanted to replace original rusted top rack of dishwasher
Needed GE Technician to install. Partselect.com had to send a second replacement rack because the first one was defective. When the second on arrived, IT TOO WAS DEFECTIVE. After the Tech tried to install the second replacement, he was forced to remove a part from the original rusted rack in order to get the 2nd replacement to even stay in the rails of the machine. Tech was great, but the Partselect.com parts were unusable as sent.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the ZDT915SSJ2SS
31 - 32 of 32