GSM1800F02BB General Electric Dishwasher - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Lance from Beach Park, IL
- Parts Used:
- WD01X10242
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
Upper rack of dishwasher was not cleaning well.
We noticed spotting and just poor cleaning performance in the dw. It was particularly bad on the top rack. After removing the racks, it was clear that the gasket on the water fitting in the back of the dw-upper was about half gone. No tools were necessary. I just unscrewed the ring nut-gasket and replaced it with the new one. Finger-tight. If the old nut was stuck, a pair of pliers would have helped.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Eric from Stephens City, VA
- Parts Used:
- WD12X10122
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Old rinse aid cap melted by heating element
Simply screwed in the new rinse aid cap to replace the old one
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- EUGENE from CENTEREACH, NY
- Parts Used:
- WD28X10215
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Dishwasher basket worn our and utensils slipped through bottom
1. open dishwasher, 2. roll out bottom dish rack, 3. remove old silverware basket, 4 place new basket in same spot old basket was in, 5. roll bottom dish rack back into dishwasher, 6. close dishwasher door.
Was this instruction helpful to you?
Thank you for voting!