GSM1800F00WW General Electric Dishwasher - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Greg from Doon, IA
- Parts Used:
- WD12X10122
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
cap was melted
replaced it
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Dean from Newark, NY
- Parts Used:
- WD12X10174, WD01X10207
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
soap dispenser latch was worn - cover would not stay shut
remove door panel (outer side) remove wires from soap dispenser remove old dispenser install new dispenser re-install wires and door cover total time less than 30 minutes
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Pauline from Oceanside, CA
- Parts Used:
- WD28X10215
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Silverware basket had holes in it.
Took old one out and replaced new one in less than one minute.
Very easy and easy to order also.
Very easy and easy to order also.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Harry from middle island, NY
- Parts Used:
- WD13X10028
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
door would not open
I bought the part for my daughter in Washington DC. We live in new york and were visiting. She told us the dish washer door was not opening. I opened the door panel and assested the problem. So I got the model number and ordered the part from you.The service was great, I had the part in a couple of days. The only problem was that I was in new york and could not install the part. I mailed it to my daughter so she could have a repair man put it in. But to my surprise she called and said she installed it herself and it was working perfect. Thats my story ! Harry Brooke
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Larry from Denvr, CO
- Parts Used:
- WD12X10122
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Dispenser Cap Missing
Ordered new cap and put it on when it arrived.
Simple
Simple
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jerome from Arlington, VA
- Parts Used:
- WD12X10122
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Lost Rinse Aid cap
Inserted new cap purchased from PartSelect.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Alice from BLAINE, MN
- Parts Used:
- WD12X10122
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
cap had melted mi
Unscrew the old one and screw in the new one.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- George from Gregory, MI
- Parts Used:
- WD28X10215
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Bottom of basket deteriorated
Remove old basket, discard, place new basket in dishwasher, fill with dirty silverware, run wash cycle.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jean from White Plains, NY
- Parts Used:
- WD12X10122
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
missing cap
I placed the missing cap into the dispenser.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Duane from Springfield, MO
- Parts Used:
- WD01X10242
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
top washer arm performing poorly
removed top rack which contains washer arm.
unscrewed the old ringnut which had lost its gasket, that the top rack washer arm merges with.
screwed the new ring nut onto the threads of the pipe which protrudes thru the back inside if the machine. reinstalled the top rack .
job done.
unscrewed the old ringnut which had lost its gasket, that the top rack washer arm merges with.
screwed the new ring nut onto the threads of the pipe which protrudes thru the back inside if the machine. reinstalled the top rack .
job done.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Andre from Ventura, CA
- Parts Used:
- WD28X10215, WD01X10242
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Dishwasher didn't clean well. Silverware basket was damaged.
Just removed the old ring nut by hand and replaced it with the new one. Took me one minute.
Exchanged the silverware basket.
Exchanged the silverware basket.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Tom from Brooklyn, NY
- Parts Used:
- WD01X10242, WD08X23648
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers, Wrench (Adjustable)
Leaking from top of main conduit
Note: I also purchased the main conduit part (PartSelect #: PS958967).
My repair is pretty much the same as the previous poster from TX. The RING NUT W/GASKET part seems to wear easily on this GE dishwasher.
Disconnected dishwasher from electrical. You have to remove the rear lower brace panel in order to remove the main conduit. The bottom end of the main conduit is clamped to a hose.
Installed the new main conduit and o-ring, screwed RING NUT W/GASKET onto upper end of main conduit. I tightened the ring nut with the wrench to make sure I got a good seal without over tightening.
I had to use a new hose clamp to reattach the lower end of the main conduit.
Reinstalled brace panel, reconnected electric, and tested.
It was an easy fix, the parts did not cost too much. I'm glad I fixed it rather than paying some repairman $$. I purchased an extra RING NUT W/GASKET in case it deteriorates again.
My repair is pretty much the same as the previous poster from TX. The RING NUT W/GASKET part seems to wear easily on this GE dishwasher.
Disconnected dishwasher from electrical. You have to remove the rear lower brace panel in order to remove the main conduit. The bottom end of the main conduit is clamped to a hose.
Installed the new main conduit and o-ring, screwed RING NUT W/GASKET onto upper end of main conduit. I tightened the ring nut with the wrench to make sure I got a good seal without over tightening.
I had to use a new hose clamp to reattach the lower end of the main conduit.
Reinstalled brace panel, reconnected electric, and tested.
It was an easy fix, the parts did not cost too much. I'm glad I fixed it rather than paying some repairman $$. I purchased an extra RING NUT W/GASKET in case it deteriorates again.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Deborah from Los Osos, CA
- Parts Used:
- WD28X10215
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
holes in dishwasher silverware basket
removed old basket, put new one in
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- ANDY from SHELBY, OH
- Parts Used:
- WD12X10164, WD01X10242, WD08X23648
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers, Wrench set
Water Leak
Replaced main conduit, o ring,and ring nut with gasket.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Christof from BISMARCK, ND
- Parts Used:
- WD13X10028
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
My dishwasher would not start
I tested the old latch assembly with my mutli-meter and determined it was faulty. I bought the new assembly and 10 screws later it was installed and the dishwhasher works.
Was this instruction helpful to you?
Thank you for voting!