GSC1200X08 General Electric Dishwasher - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- William from Middle Island, NY
- Parts Used:
- WD22X155
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
Top of the water spray "tower" was broken off by opening lower dish drawer and not checking to see if tower was in the down position.
Apply large vice like pliers at base of the lower spray arm and not applying too much pressure to plier as this is an all plastic part and slowly turn counter-clockwise until entire spray arm is loose enough to lift out and install the new part in the reverse order.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- john from spring hill, FL
- Parts Used:
- WD22X155
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
tower broken, items having to be washed twice
i removed the old power tower with a regular plumbers pliers spining SLOWLY and firmly but no too firm until it broke loose and unscrewed. I reintalled the new tower oppisite how i removed it being carefull not to overtighten. all is well. it was very ez, so much in fact that my wife thought she was going to be able to read a book waiting for me "all afternoon" to fix it! Bad news, I had to take her shopping!
i was impressed with the ease and speed of normal delivery of this part. this is a quality company. JS
i was impressed with the ease and speed of normal delivery of this part. this is a quality company. JS
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- STEPHEN from MYERSTOWN, PA
- Parts Used:
- WD22X155
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
extention broken on lower wand sprayer
turn wand counter clockwise until it's out,replace it with the new one.DON'T OVERTIGHTEN!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Evelyn Rae from Tallahassee, FL
- Parts Used:
- WD22X155
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Broken spray arm tower
I removed the broken lower spray arm tower using a scew driver and snapped in the replacement part not needing any tools.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Kevin from Valrico, FL
- Parts Used:
- WD22X155
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers, Wrench (Adjustable)
Lower Arm extention wand broke off.
Getting the upper part of the lower arm out was easy. It is just tabs that hold it in. Screwing the old one out was the hardest part it was fused in with dried detergant but once it was loose it was a real easy to put the new one back in.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Joseph from Dowagiac, MI
- Parts Used:
- WD22X155
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
replace lower spray arm
remove bottom basket, grab sprayarm by the base and turn counterclock wise. VERY simple repair
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Karen from Bowie, TX
- Parts Used:
- WD22X155
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
spray arm clips were broken that held it in place.
easy......unscrew the old one...clean the threads make sure there is no broken piece of part where its installs....take new part screw it in.....hand tight....check it for clearance......and thats it.....
Was this instruction helpful to you?
Thank you for voting!