GHDT158V00ES General Electric Dishwasher - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Susan from Colorado Springs, CO
- Parts Used:
- WD35X21041
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
All the wheel axles were broken or loose on the bottom tray of the dishwasher.
The repair was so simple a child could do it. It took less than five minutes and now the drawer rolls smoothly and is quite sturdy.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Robert from Hampton, GA
- Parts Used:
- WD14X10009
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Door had no resistance/no balance/would fall open
First, remove the bottom front covers (two parts four screws). Second, remove the two screws at the top that secure the dishwasher to the counter. Third, gently pull away the dishwasher from underneath the counter just far enough to see and be able to remove the door spring(s) - one on each side. Fourth, remove the existing hinge arm link(s) if not already broken off, replace with the new one(s). Note that the door hinge goes on the door (front) side of the spring and the other side fits into a groove on the door arm - the other end of the spring attaches to one of the 3 available holes on the frame at the bottom. It would be a good idea to replace the hinge arm links on both sides even if only one is broken. Make sure that the door has the right tension (each spring can be hooked in 1 of 3 holes to adjust the tension). Then gently push the dishwasher back under the counter. Finally, replace the screws under the counter and replace the covers on the bottom front. All of this should take no more than 15-20 minutes. This was an easy job!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jerry from Spring, TX
- Parts Used:
- WD35X21041
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Wheel axle clips broken
Just pulled the old axles out and snapped the new ones in and slid them on. Wish all household repairs were this easy.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Carol from Henrico, VA
- Parts Used:
- WD35X21041, WD35X21041
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
a couple of my wheels had broken
I replaced the wheels and axels with the ones I bought and now it is fine.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Bill from Marietta, KY
- Parts Used:
- WD35X21041, WD35X21041
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Wheels worn out
Rolled rack out-took a wheel off, put new one on without any tools. Then did the other five. This was easiest repair job in years
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Dawn from Harrisburg, PA
- Parts Used:
- WD35X21041, WD35X21041
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Wheels keep falling off
So impressed! I got my parts 2 days after I ordered them. Installation was super easy. I wonder why I waited so long to order! It was such a quick easy fix. The wheel axel is redesigned from the original ones. No more fighting to get my lower rack pulled out! Thanks for great service Parts Select!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Anthony from Colonia, NJ
- Parts Used:
- WD35X21041, WD35X21041
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
broken wheel axel because it is not made to sterdy
took out broken wheel axel and replaced it with a new one
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ricardo from Miami, FL
- Parts Used:
- WD35X21041, WD35X21041
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The lower rack's wheels were coming off
The parts came really fast, I did not even have time to think about them...when they came I was like what? They are here? WOW! anyway, I just changed the wheels with the new axel and perfect! now it works wonderful...and it was so easy! I can't believe I dealt with that for as long as I did.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Katie from Racine, WI
- Parts Used:
- WD35X21041, WD35X21041
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The old wheels were continuously falling off the lower rack. We had to lift the rack in and out of the dishwasher - total pain in the neck.
I removed what few remaining wheel assemblies there were - just pulled them off - no tools needed. Then I assembled the new wheels and wheel axels and simply snapped them on to the lower rack! It was a piece of cake.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- steven from westbrook, CT
- Parts Used:
- WD35X21041, WD35X21041
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
worn out wheels and axles
pop of the old, pop on the new! Wife happy, Priceless
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- marc from lakeville, MN
- Parts Used:
- WD35X21041, WD35X21041
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Rack Wheels...Axles=Bad
Replacement parts were better than original thanks
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Michael from Keller, TX
- Parts Used:
- WD35X21041, WD35X21041
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
the old wheels were falling off.
put the wheel on the axle clip, then attached the assembly to the rack, snapped on. Much better design but may still need replacing down the line.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- James from Draper, UT
- Parts Used:
- WD35X21041, WD35X21041
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Broken Wheels on the bottom tray
It only took 10 minutes and they had the right parts and I got them in 2 days. I am ashamed to say that I let this go for a couple of months and for about $20 and 10 minues, I was able to take care of the the issue. The3 wife is thrilled.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Susan from Wenham, MA
- Parts Used:
- WD35X21041, WD35X21041
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
original wheel fell off and melted
I took the parts, put them together in literally a minute and they worked like a charm. All for under $10. I am kicking myself for not doing it sooner. I had gone to a big DIY store where they flipped a parts card for me to call. I went online - found you had my parts, ordered over the weekend and the parts arrived early Tuesday morning.
All of America should work as well!!!!!!!!!!!!!!!
All of America should work as well!!!!!!!!!!!!!!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- JEREMIAH from BAYONNE, NJ
- Parts Used:
- WD35X21041, WD35X21041
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Stud Rollers Broken
Took less than 5 mins. To replace rollers and lower rack without tools. My life should be this easy.
Was this instruction helpful to you?
Thank you for voting!