GHDT108V60WW General Electric Dishwasher - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Andrew from DeWitt, MI
- Parts Used:
- WD35X21041
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Broken axle on one wheel
Only one axle was broken, but I replaced all 8 because GE had redesigned the axle to prevent future problems. Decided to just replace them all and be done with it. Took 10 minutes, start to finish and all is well.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Melissa from Vienna, VA
- Parts Used:
- WD35X21041
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
New wheels for lower rack on dishwasher.
Ordered on a Friday and parts arrived Sat. No tools required. Pieces easily slipped into place. Dishwasher is all fixed. This site is much easier to use than GE's. Will use PartSelect for all future replacement parts.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jonathan from New York, NY
- Parts Used:
- WD35X21041
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Wheels keep falling off dish rack.
So easy and the posts on the site were incredibly helpful in determing what part i needed. The wheels on the dish rack inside the dishwasher kept falling off. I had to keep lifting the dish rack in and out of the dish washer to load and unload it. Unbelievably annoying. I popped the old wheel axels out of the exisiting wheels and replaced them with the new wheel axels I ordered from PartSelect. Then I attached the wheels back on the dish rack and it was right back to normal.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Farrell from Grass Valley, CA
- Parts Used:
- WD35X21041
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Needed to replace original wheels on bottom rack
Very easy job. Just took out the bottom rack and replaced the wheels that kept falling off. A no brainer! works wonderful now. Most impressed with the ease of ordering and amazed how quickly the parts were delivered to me. I saved alot of money doing it myself! Thnak you
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Simon from Great Falls, VA
- Parts Used:
- WD35X21041
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The lower rack, front wheels kept falling off and getting melted on the element
We ordered 4 wheels and axels, took off the old wheels, assembled the new wheels by popping the axel into the wheel (really simple) and then snapping them onto the post. It was incredibly simple. We waited 3 days for the wheels to arrive,the mailing cost was more than the parts! The result is amazing, the lower rack now runs smoothly and sits inside the washer as it should do without falling down all the time. Well worth the small amount of effort to find the right part and much cheaper than buying a new one!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Suzanne from Oak Ridge, NJ
- Parts Used:
- WD35X21041
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
The wheels kept falling off the bottom rack of the dishwasher
My husband took off all the wheels and changed the axles. We had friends who had the same problem and they led us to your web site.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Damon from Austin, TX
- Parts Used:
- WD35X21041, WD35X21041
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
Rack does not roll correct, falls into tub
Removed old wheels and axles, installed new axles in wheels, clipped into place. I purchased new wheels and axles. Probably only needed the axles. The front wheels are narrower than the rear wheels. This probably contributes to them falling off the track. Since I purchased 8 new wheels (all wide, now I know what the second part number was for)I put all wide on. Seems to be more stable that way. New straight style axle clip appears more robust than the old side clip style. Thanks Parts select
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Curtis from Elkhorn, WI
- Parts Used:
- WD35X21041, WD35X21041
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
Lower dish rack wheels and axles were broken and off.
Removed rack from dishwasher, put axles in wheels and replaced onto lower rack. Used new design axle in replacement, seems to be an excellent fit.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Valerie from Puyallup, WA
- Parts Used:
- WD35X21041, WD35X21041
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
Front right wheels falling off lower dishwasher rack
The two lower right wheels kept falling off, then one fell down and was partly melted by the heating unit on the bottom. I went on line,read some of the do it yourself repairers to see what they did. Looked up the parts, (used the back wheels to put on the front)ordered it, delivery was just a few days and within 10 minutes done. It was just that easy. Thank you for making it that easy, a lot of us are trying to save where we can these days and that helped a lot.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Nancy from Cincinnati, OH
- Parts Used:
- WD35X21041, WD35X21041
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
wheels that allowed racks to roll on were broken
Removed broken wheels & clips from the lower rack. Easily replaced the clips and wheels with the new clips & wheels which are better built then original. The dishwasher now operates better then in its new state because the bottom rack sits higher and the bottom arm swings more efficiently and the dishes are coming out cleaner.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- William from Nolensville, TN
- Parts Used:
- WD35X21041, WD35X21041
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
wheels would not stay on
poor engineering design of lower basket wheel attachment. With time the c-clips designed to attach wheels to basket axles lost their 'torque-grip' strength allowing the wheels to fall off into the bottom of the dishwasher and melt against the drying element. The replacement clips for the wheels have a very different design and attach to the basket axles in a manner that makes it almost impossible to come off without forcing/breaking them off. I don't know what the name of the new design is, but my hat's off to the engineer(s) who developed it. Amazing how something so simple can make life so much easier. WBB
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- george from shingle springs, CA
- Parts Used:
- WD35X21041, WD35X21041
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The original design of the axle made it susceptible to coming off
Removed old wheel and axle. New wheel pops on to axle, then put hole in wheel on wheel stud and align clip to attach to vertical support behind wheel stud. Push wheel on and clip attaches. Easy!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Cody from Mount Dora, FL
- Parts Used:
- WD35X21041, WD35X21041
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Wheels fell off the bottom rack of dishwasher
Couldn't have been easier-snap, snap, snap.Took advice of another post and put the wheel and axle part together before snapping onto rack. !
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Johnny from Edmond, OK
- Parts Used:
- WD35X21041, WD35X21041
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Broken axle/wheels on lower basket
It took longer to unpack teh parts than it did to repair. Simply snaped the wheels onto the axels and then snaped the assembled units axle supports on the lower basket. Reinstalled the lower basket in the dishwasher tub and all is great.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- alexander from bethesda, MD
- Parts Used:
- WD35X21041, WD35X21041
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
wheels kept falling off
New wheels are snap on, do not fall off, great repair
Was this instruction helpful to you?
Thank you for voting!