GHDT108V60BB General Electric Dishwasher - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Kenneth from Bothell, WA
- Parts Used:
- WD35X21041
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Lower rack wouldn't roll because axles were broken
Unsnapped the wheel axle from the rack. Separated the axle from the wheel. Attached the new axle to the wheel. Snapped the new axle on the rack. Repeated for all 8 wheels. Solid.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- harry from west seneca, NY
- Parts Used:
- WD35X21041
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
wheel axles broke off from lower basket--deteriorated from age and almost daily use of dishwasher
old axles were removed by pulling wheel assembly from lower basket pins. squeezed old axle with needle nose pliers and discarded broken wheel axle. snapped wheels in place on new wheel axle and snapped wheel assembly into place on the basket. i replaced only two axles since the remaining ones were still intact. actual repair time was under three minutes. if all eight wheels would have to be replaced, i'm positive it would have taken no more than five to six minutes. in fact, the new wheel axle is a much better design than the original.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Matt from Simi Valley, CA
- Parts Used:
- WD35X21041, WD28X25960
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Lower rack jamming and hitting washer arms
I first tried the local appliance shop i got the wrong parts twice. I then wrote the model and serial #'s of my unit and found parts select. Got the right parts quickly and all I had to do was pull the old rack out and slide the new one in. Viola she was done ! Thanks Part Select !
Matt Hansen
Matt Hansen
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Andrew from DeWitt, MI
- Parts Used:
- WD35X21041
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Broken axle on one wheel
Only one axle was broken, but I replaced all 8 because GE had redesigned the axle to prevent future problems. Decided to just replace them all and be done with it. Took 10 minutes, start to finish and all is well.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- John F from Ridgewood, NJ
- Parts Used:
- WD35X21041
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
Wheels fell off lower rack
Contacted PartsSelect online on Thursday. Saturday the parts arrived. My son and I pulled the old connectors off the wheels and snapped the new ones in place. Then he snapped all the wheels onto the rack. DONE. I still find myself wanting to lift the rack now but the wheels are on and I am happy. All around EXCELLENT. Thank you.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Donna from Arlington, TN
- Parts Used:
- WD15X10014
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
Water leaking out from bottom of Dishwaser
Very easy! Removed 4 screws that was holding the valve to the bracket. Placed bracket over water inlet line. Attached copper threaded coupling with pliers.Screwed valved on to the coupling. Attached bracket to the valve with 4 screws. Reattached water line. Attached bracket to frame of dishwaser. Put kickplate back on and done!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- SANDRA from MENDOTA HEIGHTS, MN
- Parts Used:
- WD35X21041, WD35X21041
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Wheels falling off bottom drawer
Very annoying problem with wheels falling off of the bottom dishwasher rack. Thanks to good advice here, purchased wheels AND wheel axels. Axels snap into the wheels, and the wheels snap on the bottom rack. Wheels are wider that the originals, and these snap ons are a much better design. Rack rolls in and out better than brand new!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Nancy from Cincinnati, OH
- Parts Used:
- WD35X21041, WD35X21041
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
wheels that allowed racks to roll on were broken
Removed broken wheels & clips from the lower rack. Easily replaced the clips and wheels with the new clips & wheels which are better built then original. The dishwasher now operates better then in its new state because the bottom rack sits higher and the bottom arm swings more efficiently and the dishes are coming out cleaner.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Anthony from Colonia, NJ
- Parts Used:
- WD35X21041, WD35X21041
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
broken wheel axel because it is not made to sterdy
took out broken wheel axel and replaced it with a new one
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Katie from Racine, WI
- Parts Used:
- WD35X21041, WD35X21041
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The old wheels were continuously falling off the lower rack. We had to lift the rack in and out of the dishwasher - total pain in the neck.
I removed what few remaining wheel assemblies there were - just pulled them off - no tools needed. Then I assembled the new wheels and wheel axels and simply snapped them on to the lower rack! It was a piece of cake.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- James from Draper, UT
- Parts Used:
- WD35X21041, WD35X21041
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Broken Wheels on the bottom tray
It only took 10 minutes and they had the right parts and I got them in 2 days. I am ashamed to say that I let this go for a couple of months and for about $20 and 10 minues, I was able to take care of the the issue. The3 wife is thrilled.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- JEREMIAH from BAYONNE, NJ
- Parts Used:
- WD35X21041, WD35X21041
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Stud Rollers Broken
Took less than 5 mins. To replace rollers and lower rack without tools. My life should be this easy.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- William from Nolensville, TN
- Parts Used:
- WD35X21041, WD35X21041
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
wheels would not stay on
poor engineering design of lower basket wheel attachment. With time the c-clips designed to attach wheels to basket axles lost their 'torque-grip' strength allowing the wheels to fall off into the bottom of the dishwasher and melt against the drying element. The replacement clips for the wheels have a very different design and attach to the basket axles in a manner that makes it almost impossible to come off without forcing/breaking them off. I don't know what the name of the new design is, but my hat's off to the engineer(s) who developed it. Amazing how something so simple can make life so much easier. WBB
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- george from shingle springs, CA
- Parts Used:
- WD35X21041, WD35X21041
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The original design of the axle made it susceptible to coming off
Removed old wheel and axle. New wheel pops on to axle, then put hole in wheel on wheel stud and align clip to attach to vertical support behind wheel stud. Push wheel on and clip attaches. Easy!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Cody from Mount Dora, FL
- Parts Used:
- WD35X21041, WD35X21041
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Wheels fell off the bottom rack of dishwasher
Couldn't have been easier-snap, snap, snap.Took advice of another post and put the wheel and axle part together before snapping onto rack. !
Was this instruction helpful to you?
Thank you for voting!