GHDA455M00CS General Electric Dishwasher - Parts

Includes 4 rollers.

The circulation pump adapter, or pump adapter assembly connects the circulation pump to the tub of your dishwasher. If your dishwasher is leaking around this adapter, check the connection to ensure ev...

This kit includes the drain hose with black rubber end fittings and a clamp.

This is a replacement spring plunger for your dishwasher. The spring is approximately 1 inch in length and is sold individually. The spring plunger helps your door latch correctly, and if the spring i...

This filter sits at the bottom of the dishwasher.

This is the upper spray arm bearing for your dishwasher. The spray arm fits onto the spray arm bearing, which allows it to spin during the cycle. If your dishwasher is not cleaning dishes properly, or...

This is a replacement interlock plunger for your dishwasher. The interlock plunger actuates the door latch switch, which allows the door to latch, which sends a signal to the electronic control board,...

This part is a replacement middle spray arm bearing for your dishwasher. The spray arm bearing reduces friction and allows the spray arm to rotate during the operating cycle. If the spray arm is not r...

This is the replacement fine filter hub nut for your dishwasher. It is made of white plastic and is approximately 3 inches in diameter. The fine filter hub nut is also known as the lower spray arm hub...

This is a replacement interlock cover for your dishwasher. The interlock cover protects the door latch assembly, and prevents some of the smaller more important parts from being damaged or going missi...

This is the replacement rinse cap assembly for your dishwasher. It is made of gray plastic and is approximately 1 ½ inches in diameter. This rinse cap screws into the rinse aid assembly and prevents l...

This part is a replacement lower spray arm bearing for your dishwasher. It is made of gray plastic and is approximately ½ inch in diameter. The spray arm bearing reduces friction and allows the spray ...