Models > GSC3230Z01WW > Instructions

GSC3230Z01WW General Electric Dishwasher - Instructions

Jump to:

All Instructions for the GSC3230Z01WW

Customer:: Sergei from West Chester, PA
Parts Used:: WD08X10016
Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins

Replace door gasket

Removed old gasket. Then cleaned the track with a strong paper towel soaked in Windex to remove accumulated scale/soap. Followed the instructions provided with the gasket. I did not need to remove any screws from the door nor did I need to tumble the gasket in a dryer to remove kinks (There really were no kinks in the gasket, as supplied.). I did use a mirror to locate where the gasket should go underneath the bottom of the door, which you can't see. Feeling for the track with your fingers was sufficient for the installation.

Was this instruction helpful to you?

Customer:: Lawrence from Town of Tonawanda, NY
Parts Used:: WD26X10013
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Nutdriver, Screw drivers, Socket set

motor fan broke

I took the dishwasher out from under the sink and looked at the pump and motor, saw that the cooling fan that this old style motor used was broke. Ordered this kit and installed it. I didn't even look at the directions that simple of a swap. Thank God!

Was this instruction helpful to you?

Customer:: Mimi from Philadelphia, PA
Parts Used:: WD26X10013
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Pliers, Screw drivers, Socket set

Old pump leaking

The motor/pump Kit I purchased could fix/be installed in any GE dishwasher made since 1970. I would guess that the one I have is about 15-20 years old. I encountered only one small problem with the kit------ a motor hanger that had to be bent a bit to fit correctly. Other than that it was a total breeze. The clear instructions included in the kit helped quite a bit. In 30 minutes or so ,I was done and our machine was back in operation

Was this instruction helpful to you?

Customer:: Robert from Willcox, AZ
Parts Used:: WD19X10032
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Pliers, Screw drivers

Leaking motor seal

Followed easy instructions and completed repair in less than 30 minutes.

Was this instruction helpful to you?

Customer:: Daniel from Lakeport, CA
Parts Used:: WD22X10008
Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Tools:: Pliers

cracked riser in spray arm

Ordered part Monday evening installed it on Wednesday afternoon. Required a pair of pump pliers to loosen old part, new part screwed in by hand. No leaks, no problems. Took longer to explain what caused the problem then it did to fix it. I explained to the owner that overloading the dishwasher was most likely the cause. Dishes can move or fall against the riser during wash, preventing it from dropping back down. Pulling the lower rack out with the riser bound up caused the part to crack. Thanks for the speedy delivery!

Was this instruction helpful to you?

Customer:: Rick from Mt. Pleasant, MI
Parts Used:: WD22X10008
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Tower Broken

Order new part. Lightning fast delivery. Unscrew old one, put in new. 30 seconds. Don't get any easier.

Was this instruction helpful to you?

Customer:: Leanne from Divide, MT
Parts Used:: WD12X10284
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

The rinse aid fill cap was stripped.

I removed the old cap and put on the new cap.

Was this instruction helpful to you?

Customer:: Judy from Hubbard, TX
Parts Used:: WD22X10008
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

would not clean the dishes

I unscrewed the lower spray arm and support assembly and then screwed the new part in. Very easy.

Was this instruction helpful to you?

Customer:: Merwyn from Lima, OH
Parts Used:: WD28X10007
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

tower cap broke

simply snap new one in place. I will have to say your service was fantastic. I received the new cap 2nd day. I am very pleased and would not hesitate to order something else if needed.

Was this instruction helpful to you?

Customer:: Loring from Cambridge, MA
Parts Used:: WD08X10016
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

gasket deteriorated

followed the excellent instructions accompanying the gasket.

Was this instruction helpful to you?

Customer:: Thomas from Yucca Valley, CA
Parts Used:: WD22X10008
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

The smallest portion of the sprayer had been broken

Grab the large portion of the assembly and unscrew it- if you've got hard water, this may take some serious effort. Screw in the new part, and your good to go!

Was this instruction helpful to you?

Customer:: John from Corvallis, OR
Parts Used:: WD12X10284
Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins

Old rinse aid fill cap broke off at base

I removed the broken stub of the old fill cap with a screw remover. This was the only part that wasn't easy. The new cap fit fine.

Was this instruction helpful to you?

Customer:: Heidi from North Las Vegas, NV
Parts Used:: WD02X25492
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

Right door spring broke

Took lower panel off with screwdriver. Removed old spring. Attached new spring. Very easy, and I'm a woman. LOL

Was this instruction helpful to you?

Customer:: David from Bradenton, FL
Parts Used:: WD12X10284
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Dishes cloudy, spotting

Unscrew old stripped out one and put in new one ..wala!! Easy repair for this old lady...

Was this instruction helpful to you?

All Instructions for the GSC3230Z01WW