GHDA350N00BB General Electric Dishwasher - Parts

This coupler, also known as a hose connector, is made of white plastic and is about one inch in height, and just over one inch in length. Replacing the coupler is a fairly easy repair. The hardest par...

This drain hose is an OEM, manufacturer-approved replacement part for your dishwasher. The drain hose filters out the wastewater from the dishwasher. If there is a hole in it, water will leak out of y...

This works in conjunction with the pump and filtration system. It is used to receive drainage for disposal.

This part attaches to the inner door panel.

The pump ejects the water from the unit.

This part is located at the bottom of the dishwasher and is not designed to heat the water that enters it. Rather, it's designed to maintain the heat of the water that enters the dishwasher.

This knob is attached to the dishwasher door latch mechanism.

This hose clamp kit contains two clamps. The smaller of the two is an inch in diameter while the larger of the two is two inches in diameter.