Models > PDT705SYW3FS > Instructions

PDT705SYW3FS General Electric Dishwasher - Instructions

Jump to:

All Instructions for the PDT705SYW3FS
31 - 33 of 33
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Patricia from Fruita, CO
Parts Used:
WD19X25466
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Lower dishwasher spinning arm not working
Super easy repair. Took off the spinning arm, removed the Diverter Assembly (no tools required), and reassembled.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Gerald from PUEBLO WEST, CO
Parts Used:
WD01X29878
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
No lights showing on control panel
The Control panel wire harness got caught in the door hinge, got pinched and the Red wire got severed, I cut through the black protective mesh and reconnected the red wire, to prevent the wires from being damaged again I moved the wire harness over more to the left and secured it with tape.
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the PDT705SYW3FS
31 - 33 of 33