Models > GDT530PMP0ES > Instructions

GDT530PMP0ES General Electric Dishwasher - Instructions

Jump to:

All Instructions for the GDT530PMP0ES
76 - 90 of 95
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Kim from VERO BEACH, FL
Parts Used:
WD28X34744, WD28X35779, WD12X10426
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Deteriorated dishracks
Quite simple. Only disassembly/reassembly was the spray mechanism attached to the bottom of the Upper Rack. Snaps off old and on to new rack with no tools. On this dishwasher model, there is no hose assembly running to water port, but the spray assembly is instead a integrated tube with a male port that "plugs" into a female port on back of unit. Definitely get 2 end caps.
Only difference from original, is the design of the bottom rack. To fit such that the door closes, the silverware rack is at the back of the unit versus the front. Somewhat inconvenient. Can put silverware rack in front, but then less efficient for dishes.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Carol from Toms River, NJ
Parts Used:
WD22X33499
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Lower arm spay was breaking apart
Followed instructions used flat head screwdriver to unlach old arm. Took out and put in new spray arm. Really easy
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Timothy from Pedro, OH
Parts Used:
WD22X33499
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
snapped new spray arm in place
snapped new spray arm in place
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Leland from Celina, TX
Parts Used:
WD28X35779
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Top tray rusting
Ordered new one, pulled old off, pulled arm off, attached new tray and attached washer arm. Easy!
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Susan from MASON, OH
Parts Used:
WD28X34744
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Rusty Lower Rack
Removed lower rack, slid in new Rack.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Francesca from PALM COAST, FL
Parts Used:
WD28X35779
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Rusty upper rack
I simply followed the video instructions and replaced the rack myself, no tools required. Easy peasy
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
john from FT WASHINGTON, MD
Parts Used:
WD28X34744
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
The original rack was deteriorated and staining dishes.
Replaced old rack.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Praveen from Monroe Township, NJ
Parts Used:
WD28X34744
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
as better as it gets
the part is OEM and fits like a glove. No worries. There is a minor variation in design and is not like for like design but fits exactly per specs and works. I have been looking for this part for years now. Thank you for PS for maintaining the inventory.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
PRAVEEN from MONROE TWP, NJ
Parts Used:
WD28X35779
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Rusty DW Baskets
the part is OEM and fits like a glove. No worries. There is a minor variation in design and is not like for like design but fits exactly per specs and works. I have been looking for this part for years now. Thank you for PS for maintaining the inventory.
PS12743260Manufacturer Part Number WD28X26099
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Deborah from BRADENTON, FL
Parts Used:
WD21X10490
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Door would not shut, machine would not run.
Took out 2 screws that held machine in cabinet. Pulled out dishwasher about 4 inches. removed old latch and disconnected electric connection. Put in new latch, reconnected electric connection, replaced screws, pushed machine back in cabinet, replaced 2 screws that hold machine in place. Works like new!
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Patricia from Fruita, CO
Parts Used:
WD19X25466
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Lower dishwasher spinning arm not working
Super easy repair. Took off the spinning arm, removed the Diverter Assembly (no tools required), and reassembled.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Robert from BYRON CENTER, MI
Parts Used:
WD28X34744
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Rusty bottom dishwasher basket
Slid out old part and slid in new part!!! Yup that easy!!!!
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Elaine from NEWARK, DE
Parts Used:
WD28X34744
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Old Dishwasher Rack Was Rusted
Piece of cake! Slide old rack out, slide new one in. I wish I had known about this website sooner, would have changed this rack out 2 years ago. Yes, it’s a little different shape than the old one, and Yes, I can no longer put my silverware on the door. BIG DEAL! I would rather move a few dishes around than spend $700. on a new dishwasher. Tell your friends about this website, that will thank you.
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Steven from OXNARD, CA
Parts Used:
WD08X21894
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers
Bottom door seal broken and leaking
Unplug power to the dish washer.
Remove 2 kick plate screws to remove kick plate
Remove 2 screws that hold DW to underside of countertop
Slide out dishwasher enough to access the cables on each side at bottom of door.
With door closed, use plyers to lift the cable (one on each side) off the retaining stub.
Unplug door wiring connector.
Open door and slide door off the hinges.
Slide old seal out and insert new seal.

Reverse to reassemble
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Stephen from Plainfield, IL
Parts Used:
WD08X21894
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
Worn bottom door seal
Easy repair, googled a how-to video and I was surprised how well i was able to follow instructions.
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the GDT530PMP0ES
76 - 90 of 95