Models > CDT805M5N3S5 > Instructions

CDT805M5N3S5 General Electric Dishwasher - Instructions

Jump to:

All Instructions for the CDT805M5N3S5

Customer:: Al from HILTON HEAD, SC
Parts Used:: WD12X35640
Difficulty Level:: Very Difficult
Total Repair Time:: More than 2 hours

Right part wrong description

I had to replace a docking port. Parts Select had the part, labeled as stainless, just as this survey indicates. Well folks, the part I received is 100% plastic. It it the correct part, just not stainless. Should it have been stainless due to a faulty plastic design? I don’t know.

I used Parts Select for the simple directions for installation. I was eventually linked to a YouTube video for a completely different docking port. Does my part slip on? Does it press in? I don’t know.

Needless to say, this has been a cheap but frustrating ordeal that is not yet over. Thanks for having the stainless, but really plastic, part and for having directions for some other part available.

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: Mike from WARREN, PA
Parts Used:: WD19X25700
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Nutdriver

Leaking hose

Did it myself

1 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Russell from Rosharon, TX
Parts Used:: WD02X10169, WD02X10067
Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers

missing screw for Spray Arm

Remove top rack stops, slide out upper rack from rack railing, turn over upper rack and attach spray arm using spray arm bearing and screw. Reassemble in reverse order.

0 of 3 people found this instruction helpful.

Was this instruction helpful to you?

All Instructions for the CDT805M5N3S5