Models > ZBD1870N03SS > Instructions

ZBD1870N03SS General Electric Dishwasher - Instructions

Jump to:

All Instructions for the ZBD1870N03SS
16 - 30 of 42
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Jose from HOUSTON, TX
Parts Used:
WD12X10231
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers
Roller wheels on lower dish basket were worn and broken
Removed old roller with pilers and pop in New roller really easy very happy partselect had right rollers it made it easy
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
thomas from TINLEY PARK, IL
Parts Used:
WD12X10231
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Wheels broken
Just popped the old wheels off with small tack hammer very easy to get off and pop back on in a couple minutes..
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Deborah from Los Osos, CA
Parts Used:
WD28X10215
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
holes in dishwasher silverware basket
removed old basket, put new one in
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
John from ANN ARBOR, MI
Parts Used:
WD28X10215
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
The basket handle was broken in transit.
I ordered the silverware basket because the original started to separate. The shipment box was damaged and sure enough the handle was broken. The handle can be removed so I replaced the new handle with the old handle, since it was the basket that really needed. Pops off very easily.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Sophie from HOLYOKE, MA
Parts Used:
WD12X10286
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Replaced the micro filter
Just tool out the old micro filter and put in the new filter.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
CHUCK from CINCINNATI, OH
Parts Used:
WD28X10215, WD13X23417, WD08X10050
Difficulty Level:
Very Difficult
Total Repair Time:
More than 2 hours
bottom door gasket replacement/door latch replacement
Need to remove door from hinges to allow to SLIDE gasket thru small lip on door.After using soap and cleaning lip on dishwasher face ,Gasket never feels to grasp lip properly.Identical gasket from old design,just difficult to install.Door latch was also easy to install,BUT LATCH WAS PURCHASED IN LOCKED POSITION.Make sure to roll tumbler in latch ,or it will never lock.
4 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Vivian from RAMSEY, NJ
Parts Used:
WD24X10048, WD01X10322
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Leaking drain hose
Removed leaking drain hose under the dishwasher from drain pump and sink drain pipe. Fed new hose behind dw connected with new clamps to dw drain pump and sink drain pipe. Put in high loop under sink.
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
CAROL from BUFFALO, NY
Parts Used:
WD28X10215
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
needed new silverware basket
took out the old basket and put in the new basket
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Michael from Gwinner, WI
Parts Used:
WD12X10221
Difficulty Level:
Really Easy
Total Repair Time:
More than 2 hours
Tools:
Screw drivers
Roller wheels wore out.
manual labor.. And a little help from Milwaukee power tools.
4 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Danielle from Fort Edward, NY
Parts Used:
WD12X10231, WD12X10230, WD12X10221, WD08X23648
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Seals and Wheels
It was really easy to find the parts in the diagram your website provided. Youtubed the repair instructions....done....thank you very much
Was this instruction helpful to you?
Thank you for voting!
Customer:
Eric from Stephens City, VA
Parts Used:
WD12X10122
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Old rinse aid cap melted by heating element
Simply screwed in the new rinse aid cap to replace the old one
Was this instruction helpful to you?
Thank you for voting!
Customer:
Colette from Lakewood Ranch, FL
Parts Used:
WD12X10231
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
The wheels were falling off from the bottom rack of my dishwasher.
I ordered 8 wheels, but I really needed just 4.( I am preventing for the future) It was so very simple to place my order and they were delivered in no time. I simply took off the old one, looked at how they were affixed and put the new ones the same way. Less than 2 minutes to do the entire job. I am a "Handy woman".
Was this instruction helpful to you?
Thank you for voting!
Customer:
EUGENE from CENTEREACH, NY
Parts Used:
WD28X10215
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Dishwasher basket worn our and utensils slipped through bottom
1. open dishwasher, 2. roll out bottom dish rack, 3. remove old silverware basket, 4 place new basket in same spot old basket was in, 5. roll bottom dish rack back into dishwasher, 6. close dishwasher door.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Martha from Kingman, AZ
Parts Used:
WD12X10122
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Rinse Dispenser Cap melted on heating coil
Opened dishwasher after it completed a wash cycle. Found the rinse dispenser cap had come off during the wash and melted on the heating coil at the bottom of the machine. Pulled cap off of coil, made sure coil was not disturbed. Looked in various sites for cap. Finally found this site where I didn't need to order the whole mechanism and could order just the cap. Received the cap, screwed into the dispenser, fixed. The only problem I had was that there were two possible caps so I picked the one that was the same color as the original one. Project completed. Thanks
Was this instruction helpful to you?
Thank you for voting!
Customer:
Mary from Rocky River, OH
Parts Used:
WD12X10231
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Lower rack wheels kept falling off on right side
Definately purchase all the wheels (8) as they are smaller than original wheels. Buy the wheel with attached stud. Pull off old wheels and pop these on!
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the ZBD1870N03SS
16 - 30 of 42