GSM1800JW General Electric Dishwasher - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Henry from Erwinna, PA
- Parts Used:
- WD28X10215, WD12X10178
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Pliers
Broken roller assembly
Removed broken assemby. Replaced with new part. Basket was an even swap.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Bruce from Pittsburgh, PA
- Parts Used:
- WD12X10168, WD12X10167
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
My dishwasher filters were clogged by calcium scale
I just lifted out the old parts from the bottom of the dishwasher and replaced them with the new ones which seated securely with no problem. The extreme amount of calcium carbonate in the water in Barbados settles on anything that gets wet. We clean the parts in the dishwasher, tea kettle and any other device that gets hot water, about every six months but eventually the boiler scale clogs the works and, while I can boil the parts in vinegar to clean them, the new replacements are much better and more convenient.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Lance from Beach Park, IL
- Parts Used:
- WD01X10242
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
Upper rack of dishwasher was not cleaning well.
We noticed spotting and just poor cleaning performance in the dw. It was particularly bad on the top rack. After removing the racks, it was clear that the gasket on the water fitting in the back of the dw-upper was about half gone. No tools were necessary. I just unscrewed the ring nut-gasket and replaced it with the new one. Finger-tight. If the old nut was stuck, a pair of pliers would have helped.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Dexter from Hempstead, NY
- Parts Used:
- WD18X10028, WD12X10164, WD01X10242, WD08X23648
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers
hole in connectiing duct. causing leaking.
First I shut off water and unplugged pwr cord from washer.I then removed hose from connecting duct and remove connecting duct from washer. I then installed new duct and reattached hose to connecting duct. After installation I reattached water hose then plugged back in pwr cord.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- EUGENE from CENTEREACH, NY
- Parts Used:
- WD28X10215
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Dishwasher basket worn our and utensils slipped through bottom
1. open dishwasher, 2. roll out bottom dish rack, 3. remove old silverware basket, 4 place new basket in same spot old basket was in, 5. roll bottom dish rack back into dishwasher, 6. close dishwasher door.
Was this instruction helpful to you?
Thank you for voting!