GHDA480NW General Electric Dishwasher - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- R. Cecil from Norfolk, VA
- Parts Used:
- WD35X21038
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
wheel was distorted
Simply replace wheel
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jan from Montesano, WA
- Parts Used:
- WD13X10045
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Door latch would not release permitting the door to open for reloading.
First I removed the 8 screws on the interior side of the door that holds the plastic inner-face to the door assembly. This allowed me to easily pry the inner face away from the outer face which exposed the latch assembly.
The broken latch practically fell out making it very easy to work the new one into place.
I replaced the 8 screws, closed the door until I heard it latch and then squeezed the handle and was rewarded with a very satisfying sound and feel as the door popped open without a hitch.
I know a repairman would have cost me a minimum of $75 plus a hefty price for the part.
The broken latch practically fell out making it very easy to work the new one into place.
I replaced the 8 screws, closed the door until I heard it latch and then squeezed the handle and was rewarded with a very satisfying sound and feel as the door popped open without a hitch.
I know a repairman would have cost me a minimum of $75 plus a hefty price for the part.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Christine from Williston, ND
- Parts Used:
- WD22X10047
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Dishes were not cleaning properly
Self
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Nick from Chatham, NJ
- Parts Used:
- WD35X21038
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
wheels colapsed
replaced new wheels
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- selleck from kingston, NY
- Parts Used:
- WD15X10003
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers, Wrench (Adjustable), Wrench set
Did not have water flowing into dishwasher
I removed the old valve with wrench and Philips screw driver.Unscrewed the mounting plate and water hose. When I went to replace the new water inlet valve, I found that there was a mismatch on the screw holes for the new mounting plate. Different screw threads. I tried to find screws that would fit, but didn't have any.So I manged to make the old screws re-thread themselves and hold the plate in place. I then attached the water hose and started the dishwasher up. Make sure to power off the unit then power it back on to clear and reset the programming. Works great now.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- ROY from CULPEPER, VA
- Parts Used:
- WD13X10045
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
broken door handle actuator
Parts were easy to find, easy to order and arrived prior to the advertised delivery date. Instructions for replacement were easy to understand and in about 10 minutes the old part was removed, and the new one installed. thanks for your prompt and efficient company.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Frank from Tinton Falls, NJ
- Parts Used:
- WD22X10029
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
The old plastic filter's corner were bent up allow food to get into the plumbing going to the articulation sprayers and clogging them.
Remove bottom articulating sprayer and water fittings. Remove and replace filter
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Nicholas from Alexandria, VA
- Parts Used:
- WD35X21038, WD35X21038
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
lost wheel
just snapped the new part in. couldn't have been easier
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Christopher from St Augustine, FL
- Parts Used:
- WD24X10045, WD12X10061, WD01X10103
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Pliers, Screw drivers
Rate chewed drain hose up.
Removed screws that held dishwasher under cabinet...pulled out DW...removed old part...replaced with new....easier than falling off a stump.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- andrew from galveston, TX
- Parts Used:
- WD21X10224
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
wouldnt start and lights flickered
pulled switches flicked leaver worked when itwanted to and not every time. I removed then shorted then rechecked everthing worked. got on line ordered parts good price fast service fixed 30 min when they came in saved money.Thank God! 20.00 fix instead of 200.00 +
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Cerem from Staten Island, NY
- Parts Used:
- WD13X10045
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
There was no problem in installing this part
Easily screwed on this part and used it for the door of the dishwasher to properly open and close
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Donald from Colchester, VT
- Parts Used:
- WD21X10247
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Broken touch pad & main board
Removed broken parts, installed new parts. Instructions were excellent (well illustrated and complete).
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Donald from The Villages, FL
- Parts Used:
- WD26X10053
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver
Leak from motor output/pump input shaft
Cut power and water flow to the appliance. Laid appliance on its side, removed the electrical lead from the motor. Remove the mount from the back of the motor and loosened the two clamps- one to the sump and one to the discharge tube. Removed and replaced the pump/motor assy. with the new one, reinstalled the clamps, rear mount and electrical lead. Righted the unit and fired it up. Worked fine.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Fabian from Hobart, IN
- Parts Used:
- WD22X10084, WD22X10047, WD22X10046
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver
The washer didn't seemed to clean very well
Each arm was held in place by one nut. Using a nut driver, I it backed out, replaced arm and then screwed nut back in. Hardest part was positioning myself over the open door. After all the hard work it paid off. Dishes are cleaner now.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Richard from Bay Village, OH
- Parts Used:
- WD15X10003
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)
water inlet valve stuck open (frozen??)
after watching related video on partselect.com, diagnosis and repair couldn't have been much simpler!
Was this instruction helpful to you?
Thank you for voting!