GSC3500NW General Electric Dishwasher - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Marlene from Canyon Lake, CA
- Parts Used:
- WD28X31819
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
There was no problem, out of the box, into the bottom of the dishwasher.
No repairs needed, just replace the lower dishrack with 2 broken wheels with the new dishrack with the wheels already attached. Easy as A,BC or 1,2,3.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Sally from Wauconda, IL
- Parts Used:
- WD35X21038
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
One of the wheels and hangers went missing.
Check website, order part. Hardest part was determining which was the right part. Needed the axle--I call it the hanger. I had previously called and ordered, but only received the wheel with no way to attach it. Push the axle into the wheel. Push the axle onto the rack. Since it was new, it didn't slip right on, and had to push it hard. (However, when it snapped on, three of the other wheels and axles came off.) Had to put them back on as well. Much easier, as they were older and not as snug. Total time: Took longer to open the package than put it on.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- George from Krum, TX
- Parts Used:
- WD28X31818, WD28X31819
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Upper and lower racks had badly rusted.
I watched the YouTube video about removing the end tabs on the upper rack then simply removed them with a flat head screw driver. Then, after replacing the rack, I re-inserted the tabs using the screw driver. as shown in the video. There's really nothing to it after watching the video, which is about 2 minutes long.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- David from Bradenton, FL
- Parts Used:
- WD12X10284
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Dishes cloudy, spotting
Unscrew old stripped out one and put in new one ..wala!! Easy repair for this old lady...
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- NEIL from BOYNTON BEACH, FL
- Parts Used:
- WD28X31818
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
rusted out upper rack needed replacement
using small flat head screwdriver popped off clips at end of runners --rolled in new rack-- inserted clips back into runners
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Douglas from Waterford, MI
- Parts Used:
- WD35X21038
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Bad wheel
Pull rack out put wheel on put rack back
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Tom from pearland, TX
- Parts Used:
- WD28X31818, WD28X31819
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
trays needed replacing
Repair went very well, parts arrived in perfect condition and quicker than expected. I am very satisfied and will order again in the future.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- DONALD H from AURORA, CO
- Parts Used:
- WD28X31819
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
lower rack replacement
big project remove old dish rack and replace with mew rack.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Bonnie from Shady Side, MD
- Parts Used:
- WD28X31819
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The coating on the lower rack was showing signs of wear and several end caps had worn away..
The part arrived in three days and matched perfectly. All I had to do was take out the old rack and set the new one on the track and close the door. We recently sold our house and want to leave everything clean and in good shape just as we would expect it to be. I wish replacing all parts was this easy. Bonnie Stanley
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Timothy from Loma, CO
- Parts Used:
- WD28X31818, WD28X31819
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Our old racks were getting rusty and breaking off.
We did not want to spend money for a new dishwasher when the motor is doing just fine. So we went to our local Sears store and were told it would be $200.00 plus tax and it would be 7-10 days for shipping. So we went to partselect.com and ordered an upper and lower dishrack. It was here in 2 days and we paid about $175.00. They were really easy to replace and are working just fine.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Judith W. from Topeka, KS
- Parts Used:
- WD35X21038
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Lower rear rack wheels
Quick and easy...a 7 yr old could have done it.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Gerald from Wichita, KS
- Parts Used:
- WD28X31818
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
upper dishrack needed replacement
In order to replace the upper dishwasher rack I needed to remove the end stoppers on the sliders. They were difficult to remove and one of them broke. I then ordered new end pieces. The new ones had been redesigned and were very easy to insert. If you need to replace the upper rack be certain to order new endpieces along with the order for a new rack. They are quite inexpensive.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Elizabeth from Ames, IA
- Parts Used:
- WD28X31819
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
serious rust & corrosion on the rack
just lifted out the old one & replaced it with the new one. Couldn't have been easier.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Felicia from Philadepia, PA
- Parts Used:
- WD22X10055
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
dishwasher part
My son took the part and it plop right into place with a click, and we were able to use are dishwasher again,Thanks
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Douglas from Wentzville, MO
- Parts Used:
- WD28X31818, WD28X31819
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Dishracks worn, needed replacement.
The upper rack fit, but the rack differed from the original to the extent that glasses that normally could be washed on the upper rack no longer fit, and the inverted upper rack "funnel" is further from the water stream nozzle reducing the effectiveness of cleaning on the upper rack. The rack rests significantly higher in the machine than the original.
Was this instruction helpful to you?
Thank you for voting!