DB400A1 Frigidaire Dishwasher - Parts

This motor shaft seal kit does not include a macerator blade, but does come with wash and drain impellers(upper and lower).

This water inlet valve should be located behind the lower kickplate panel in either the right or left corner. The attaching solenoids on the valve open and close according to the desired amount of water needed.

This white rinse aid cap is a little over two inches long. It comes with a black rubber gasket, and is used for some dishwashers.

With this macerator blade it chops up/mince the food particles in the collection chamber to prevent from clogging the dishwasher pump.

This detergent cup repair kit comes with the cam, spring and o-ring.

This black pump housing spacer plate is a little under four inches long.

This pump motor shaft seal will help prevent the water inside the dishwasher from leaking around the shaft of the motor.

Holds the spray arm onto the diffuser assembly.

This tower base is located on the lower spray arm.