MF18P2 Frigidaire Dishwasher - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Sharon from South Park, PA
- Parts Used:
- 5304532229
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
original rack wheels where bent and upper wheels had melted
husband replaced wheels.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Matt from Salisbury, NC
- Parts Used:
- 154106202
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
(leaking) heater element nuts cracked under dishwasher
power off, take off kickplate, unplug 2 wires and unscrew broken nuts, put new nuts on, plug wires back in,(run dishwasher one cycle to make sure no leaks) put kickplate back on, power on.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- John from Camarillo, CA
- Parts Used:
- 5304532229
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Lower dish rack difficult to pull out to load/unload
Thanks to PartsSelect exploded drawings, it was easy to identify and order the part. Installing was a case of just snapping it on the rack.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Thomas from webster, FL
- Parts Used:
- 154106202, 5300806833
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Socket set
water leaking around heating element
Used a deep 13 mm socket to remove the old nuts, one of which was split which is what caused the problem. I installed the new grommets with the aid of a little olive oil and then I had to wiggle the element very slightly (more olive oil on the heating element where it slips in the grommet) while pressing down on the element. It slipped into place and then I reinstalled the new nuts and the wires and it was done. One word of caution the stainless mounts that hold the heating element are very sharp on the edges. If you use gloves and move them very easy to prevent damage to the mounts it will be easy to replace the grommets and the nuts.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Kevin from Old Orchard Beach, ME
- Parts Used:
- 154106202
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers, Wrench set
My dishwasher was leaking from and electrical connection at the heating element
There was an excellent "how to" video on the internet which also pointed me to the part I needed. I did not even remove the dishwasher as recommended. I removed the lower kick plate, removed the power connector at the leaking input, removed the bad nut and installed the new nut.
Was this instruction helpful to you?
Thank you for voting!