GDPP4517AD1B Frigidaire Dishwasher - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Raymond from El Paso, TX
- Parts Used:
- 154827601
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
the tub was leaking at the right front corner
just pushed it into the crevice with my thumb
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Matt from Salisbury, NC
- Parts Used:
- 154106202
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
(leaking) heater element nuts cracked under dishwasher
power off, take off kickplate, unplug 2 wires and unscrew broken nuts, put new nuts on, plug wires back in,(run dishwasher one cycle to make sure no leaks) put kickplate back on, power on.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Dunstan from Port St.. Lucie, FL
- Parts Used:
- 154827601
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Leak at bottom of door
Remove old gasket from tub, soak new gasket in hot water for a few minutes then install starting from center top of tub, when done installing close door for 24 hours, then try to see if leak fixed.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- William E from High Point, NC
- Parts Used:
- 154106202
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers, Wrench (Adjustable)
Broken heating element brass nut
Ditto the other comments. Easy, great savings. Perfect. Thank you!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ronda from Monkey Island, OK
- Parts Used:
- 5304523457
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
water intake tube had been chewed by mice
very simply removed 2 clamps, replace hose, re-installed clamps
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Robert from Kirkwood, MO
- Parts Used:
- 807117001
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Water Leak in Dishwasher Drain Line
I woke up on Christmas Day to water pooling under the kitchen sink (I guess I made the naughty list last year). Upon inspection, I could see that the water connections for the faucet were damp. Since I had all the parts, I replaced the faucet and service lines. Once complete, there were no leaks so I turned on the dishwasher to double check for leaks in those lines. It was all dry when the dishwasher finished but the next morning, more water under the sink.
I proceeded to replace the water line to the dishwasher and ran it through another wash cycle. Still leaking.
I found PartsSelect online and order a new drain line for the dishwasher. To my amazement, FedEx dropped off my order the next morning........yes, the next morning.
It took five minutes to remove the old drain line and install the new one (just a worm clamp at each end). It would have been faster than that but I don't get up and down as fast as I use to.
I proceeded to replace the water line to the dishwasher and ran it through another wash cycle. Still leaking.
I found PartsSelect online and order a new drain line for the dishwasher. To my amazement, FedEx dropped off my order the next morning........yes, the next morning.
It took five minutes to remove the old drain line and install the new one (just a worm clamp at each end). It would have been faster than that but I don't get up and down as fast as I use to.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- john from punta gorda, FL
- Parts Used:
- 154825001
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Wrench set
thought water leak via heater element
on close investigation the problem was not the element ,but one of the brass nuts was fractured this was repaired and leakage was rectified. I .would add that your service and delivery was excellant and the unrequired element will be returned to you thanks
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Roseana from Virginia Beach, VA
- Parts Used:
- 154827601
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
The close door code kept going off and was leaking on the bottom.
Took the gasket off and put the new one on.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- John from Hammonton, NJ
- Parts Used:
- 154827601
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
Leaking at the door
I just pulled the old one out and installed the new.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jeffrey from Rougemont, NC
- Parts Used:
- 154406401
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
Spinner fell off of delivery tube.
Wrap your pliers in some kind of padding so you don't damage the plastic. Spin the base ( not the spinner itself) which is left-threaded(normal). If the gasket doesn't fall out (mine did) pull it out gently. Clean the gasket socket with a rough cloth or scotch-brite pad and install the new one. Put it all back together and wash dishes, man.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- cody from kalispell, MT
- Parts Used:
- 154827601
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
leaking aroung the door
replaced gasket easy-peesy
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Dean from Boscobel, WI
- Parts Used:
- 154827601
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
dishwasher door was leaking.
Pulled out the gasket,trimmed the gasket to fit and alittle pressure to put.it in place, very easyto do. No worries any one can do this and savek yourself costly repair person.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Mahlon from Kirby, TX
- Parts Used:
- 807117001
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers
Rat chewed thru the drain HO9SE
pULLED THE WASHER FROM THE COUNTER disconjnected the house from the garbage disposal connected thenew hose to the disposal, remove other end of old hose from thedishwasher and replace with the new drainage hose.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher would not pump water out
After looking at several youtube.com remedies, I zeroed in on the problem... non-functioning waste water pump. I also noted that the valve flapper was in rough shape so ordered both. Once I got the new parts, I replaced the old ones in less than 30 minutes. When I removed the old pump assembly, I discovered that the four-blade waste water wheel had broken off. For about $75, I repaired what no one in my small rural town could. I think the retail on the dishwasher was somewhere between $300-350, so I figured it was a good deal. Also I scored BIG man points with my wife!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Thomas from South River, NJ
- Parts Used:
- A00126401
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Water would not drain from dishwasher
Disconnect drain hose, disconnected power, laid dishwasher on its back. Had to remove wash motor, then had access to the drain pump. Removed bad drain pump, installed new drain pump, reinstalled wash motor, reconnected drain hose, then reconnected power. Job is done working as intended. Really easy.
Was this instruction helpful to you?
Thank you for voting!