Models > CDBEH351UW0A > Instructions

CDBEH351UW0A Frigidaire Dishwasher - Instructions

Jump to:

All Instructions for the CDBEH351UW0A
76 - 90 of 118
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Keith from Meansville, GA
Parts Used:
154106202
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Wrench set
Dishwasher leaking from underneath unit
Spotted the source of the leak at the first heating element under the dishwasher. Removed the brass mounting nut and it was cracked. Replaced with new part from PartSelect.com and the leak was fixed. Apparently the heating element gets so hot it tends to crack the mounting nuts, which results in a leak. Delivery time for part said 3-5 days - mine arrived one day after ordered!
Was this instruction helpful to you?
Thank you for voting!
Customer:
Steven from Wauwatosa, WI
Parts Used:
807117001
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
Had to replace the drain hose (that I screwed up)
I already had the dishwasher removed for remodeling. I wrecked the drain hose myself. When I received the replacement it was a breeze to install.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Wilburn from Cumming, GA
Parts Used:
807117001
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
need drain house
Very helpful and was amazed how quickly it was delivered. Very pleased.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Gary from Roseville, CA
Parts Used:
154827601
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Water discharge (around door) during Wash Cycle
After reading some "Suggested Installation Instructions" on the Parts Select Website, I felt at ease tackling this job. After opening the door, I simply pulled-out the existing door gasket. The installation involved simply pressing in the new gasket with my finger and insuring it was properly seated. The only tool I had to use was a pair of scissors to cut the excess length as I pressed it in. REALLY APPRECIATED THE SIMPLE INSTALLATION INSTRUCTIONS as I had never done this particular task.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jeffrey from Rougemont, NC
Parts Used:
154406401
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
Spinner fell off of delivery tube.
Wrap your pliers in some kind of padding so you don't damage the plastic. Spin the base ( not the spinner itself) which is left-threaded(normal). If the gasket doesn't fall out (mine did) pull it out gently. Clean the gasket socket with a rough cloth or scotch-brite pad and install the new one. Put it all back together and wash dishes, man.
Was this instruction helpful to you?
Thank you for voting!
Customer:
cody from kalispell, MT
Parts Used:
154827601
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
leaking aroung the door
replaced gasket easy-peesy
Was this instruction helpful to you?
Thank you for voting!
Customer:
John from Hammonton, NJ
Parts Used:
154827601
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Leaking at the door
I just pulled the old one out and installed the new.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Dean from Boscobel, WI
Parts Used:
154827601
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
dishwasher door was leaking.
Pulled out the gasket,trimmed the gasket to fit and alittle pressure to put.it in place, very easyto do. No worries any one can do this and savek yourself costly repair person.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Dunstan from Port St.. Lucie, FL
Parts Used:
154827601
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Leak at bottom of door
Remove old gasket from tub, soak new gasket in hot water for a few minutes then install starting from center top of tub, when done installing close door for 24 hours, then try to see if leak fixed.
Was this instruction helpful to you?
Thank you for voting!
Customer:
William E from High Point, NC
Parts Used:
154106202
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Wrench (Adjustable)
Broken heating element brass nut
Ditto the other comments. Easy, great savings. Perfect. Thank you!
Was this instruction helpful to you?
Thank you for voting!
Customer:
Ronda from Monkey Island, OK
Parts Used:
5304523457
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
water intake tube had been chewed by mice
very simply removed 2 clamps, replace hose, re-installed clamps
Was this instruction helpful to you?
Thank you for voting!
Customer:
Robert from Kirkwood, MO
Parts Used:
807117001
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Water Leak in Dishwasher Drain Line
I woke up on Christmas Day to water pooling under the kitchen sink (I guess I made the naughty list last year). Upon inspection, I could see that the water connections for the faucet were damp. Since I had all the parts, I replaced the faucet and service lines. Once complete, there were no leaks so I turned on the dishwasher to double check for leaks in those lines. It was all dry when the dishwasher finished but the next morning, more water under the sink.
I proceeded to replace the water line to the dishwasher and ran it through another wash cycle. Still leaking.
I found PartsSelect online and order a new drain line for the dishwasher. To my amazement, FedEx dropped off my order the next morning........yes, the next morning.
It took five minutes to remove the old drain line and install the new one (just a worm clamp at each end). It would have been faster than that but I don't get up and down as fast as I use to.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Mark from Apopka, FL
Parts Used:
154430501
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
dishwasher door was falling heavily down when pulled open because one of the two springs was broken
identified the correct part to order. when it came, I used a Phillips-head screwdriver to undo the two brackets that hold the unit into the bottom of the countertop so I could slide it out a few inches. once I determined which spring was broken, I pulled out the remaining part and replaced it with the new one -- hooking it first into the hold farthest back in the appliance and looping the longer end over the top of the swiveling catch device that holds the front of the spring. then pushed unit back under countertop and screwed two brackets back into place with the existing wood screws and screwdriver. piece o' cake!
Was this instruction helpful to you?
Thank you for voting!
Customer:
john from punta gorda, FL
Parts Used:
154825001
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Wrench set
thought water leak via heater element
on close investigation the problem was not the element ,but one of the brass nuts was fractured this was repaired and leakage was rectified. I .would add that your service and delivery was excellant and the unrequired element will be returned to you thanks
Was this instruction helpful to you?
Thank you for voting!
Customer:
Matt from Salisbury, NC
Parts Used:
154106202
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
(leaking) heater element nuts cracked under dishwasher
power off, take off kickplate, unplug 2 wires and unscrew broken nuts, put new nuts on, plug wires back in,(run dishwasher one cycle to make sure no leaks) put kickplate back on, power on.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the CDBEH351UW0A
76 - 90 of 118