PLD2855RFC1 Frigidaire Dishwasher - Parts

This dishwasher door gasket is attached to the bottom of the door, creating a strong seal between the tub and the outer edge of the door. This seal is prone to wear and tear due to its constant exposu...

The door gasket provides a watertight seal between the tub and the door, to keep water from leaking out of your dishwasher. If your dishwasher is leaking you may need to replace the door gasket. This ...

This is a single rack roller kit for your dishwasher. This kit comes with one axel/clip, and one wheel/roller. The kit is used for the lower dishrack, and allows your rack to move freely. You will nee...

The upper spray arm is found above the top rack in your dishwasher. If your dishes are not properly cleaned after the cycle has finished, the spray arm may need to be replaced. As the part is made of ...

This is a genuine OEM replacement water inlet valve for your dishwasher. The water inlet valve supplies water to the dishwasher by opening and closing the solenoids attached to the valve, depending on...

This heating element mounting nut is used in dishwashers and is used to hold the nut to prevent leaking. If your nut is damaged or you notice leaking from the dishwasher, then replacing this nut will ...

The drain hose connects to the pump located below the lower spray arm. It aids in proper dishwasher drainage. Size: 7.5 feet long

This genuine OEM part is a lower spray arm support for your dishwasher. It is found in the bottom of the dishwasher and is the piece that the lower spray arm attaches to. If this part has become damag...

Sold individually.

Upper Rack Assembly - T3 PRO. This is the complete upper rack and the wash arm.

Sold individually.

This rail end cap, or dishrack stop clip, is a genuine OEM replacement part for your dishwasher. This part keeps the rack in your dishwasher from sliding out. This is a very easy repair, to complete i...