Models > FFID2426TW3A > Instructions

FFID2426TW3A Frigidaire Dishwasher - Instructions

Jump to:

All Instructions for the FFID2426TW3A
106 - 120 of 241
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Al from WOODBURY, MN
Parts Used:
154827601
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Old gasket melted.
Watched installation video and followed directions. All went smoothly.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Michael from STEWARTSVILLE, NJ
Parts Used:
5304532229
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Missing part
Just pushed it onto the rod that held the old one
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Janice from ELK GROVE, CA
Parts Used:
5304506521
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
Plug for soap dispenser.
My future son in law did it. Looked at instructions on the app for the part. Didn't take very long.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Danny from Collierville, TN
Parts Used:
5304500204
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Bottom seal on door came out and melted on heating element.
Took me about 2 minutes to repair, no tools to repair, very easy installation repair!
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Raymond from VERO BEACH, FL
Parts Used:
5304533200
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Rack was rusting on the bottom due to the plastic no longer covering the metal
simply removed the old slide out rack and replace with new one
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
GENE from BRONX, NY
Parts Used:
5304506521
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Dispenser failed to operate
Uncomplicated repair. Remove door, remove old dispenser, install new dispenser.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Andy from Grass Range, MT
Parts Used:
5304507158
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
The top part of the lower spray arm got stuck on something a broke off the lower part of spray arm.
The are 2 tabs on the bottom of the lower spray arm that I pushed in and the arm popped right off. All you have to do is push the new spray arm on until you hear it snap into place, and you are done. It is really easy to do, and the part fit perfectly.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Ron from Sublimity, OR
Parts Used:
154756401
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Cable was broke
Opened door. Located 2 Phillips head screw s attaching the dishwasher to counter and removed them. Slid the dishwasher out about 8 inches. Love broken cable and removed . Inspect spring and attached new cable. Inspected opposite cable and spring. Tucked insulation around dishwasher and slid back into place. Reattached 2 Phillip screws and closed door.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Catherine from CYPRESS, TX
Parts Used:
5304533200
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
bottom dishwasher rack had melted prongs
I put in the new rack but discovered it only has prongs for a few dishes the rest of it is flat with NO prongs. So it doesn't really work.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Paul J from LEXINGTON, MA
Parts Used:
154579101
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
One door spring was broken - the other was spring.
Instead of moving the unit out from under the counter, I did the job with the unit in place: (1) long reach to remove the old springs and attach the new ones to the frame at back of the unit, (2) use a loop of string to hook onto the other end of the spring, stretch it a little, and keep it stretched by hooking the other end of the loop to the screw that adjusts the unit's height, (3) slip the end of the cable to the front end of the spring and check to make sure that the cable is on its pulley, (4) take the string off the adjusting screw and wiggle it to free it from the end of the spring. (For comfort, lie down on a yoga mat when you do this job - thanks to my wife for this helpful suggestion!)
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Robert & Kathleen from FAIRFAX, VT
Parts Used:
154579101
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Door springs were stretched; with one broken
Followed the on-line tutorial. BINGO!!!!
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Sharon from HAMPTON, NH
Parts Used:
5304506916
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Two of the tub wheels cracked and broke off.
Unscrewed the old ones, new ones come with screw built in and recrewed the new ones in. So easy.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jimmy from COMSTOCK PARK, MI
Parts Used:
154825001
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Wrench set
My heating element was cracked
Remover the cracked heating element with the new heating element.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Rita from MEDANALES, NM
Parts Used:
5304523457
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Dishwasher Sprang a Huge Leak
I pulled out the dishwasher and found the inlet tubing had a tear in the accordion part of the tube. I searched online for the model number and was directed to PartSelect. I ordered the inlet tubing, and it only took a few days to get to me. I then watched the video and was able to install the new tubing.

PartSelect is a life saver and I saved lots of money by not having to call a repairman.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
John from SUNBURY, PA
Parts Used:
154579101
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers
Left door spring had stretched and no l held the door upright
Opened the package and inspected the new spring
Went to Part Select site to read directions
shut off the power
Reached under the dishwasher and disconnected the old spring from the frame
detached the old spring from the pulley cord
attached the new spring to the pulley cord
reached under the dishwasher and attached the new spring to the frame
Turned the power back on
total time around 15 minutes including reading the instructions
Piece of cake!
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the FFID2426TW3A
106 - 120 of 241