Models > FFID2426TD3A > Instructions

FFID2426TD3A Frigidaire Dishwasher - Instructions

Jump to:

All Instructions for the FFID2426TD3A
121 - 135 of 258
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Al from WOODBURY, MN
Parts Used:
154827601
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Old gasket melted.
Watched installation video and followed directions. All went smoothly.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Robert & Kathleen from FAIRFAX, VT
Parts Used:
154579101
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Door springs were stretched; with one broken
Followed the on-line tutorial. BINGO!!!!
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
John from SUNBURY, PA
Parts Used:
154579101
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers
Left door spring had stretched and no l held the door upright
Opened the package and inspected the new spring
Went to Part Select site to read directions
shut off the power
Reached under the dishwasher and disconnected the old spring from the frame
detached the old spring from the pulley cord
attached the new spring to the pulley cord
reached under the dishwasher and attached the new spring to the frame
Turned the power back on
total time around 15 minutes including reading the instructions
Piece of cake!
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Andy from Grass Range, MT
Parts Used:
5304507158
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
The top part of the lower spray arm got stuck on something a broke off the lower part of spray arm.
The are 2 tabs on the bottom of the lower spray arm that I pushed in and the arm popped right off. All you have to do is push the new spray arm on until you hear it snap into place, and you are done. It is really easy to do, and the part fit perfectly.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Catherine from CYPRESS, TX
Parts Used:
5304533200
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
bottom dishwasher rack had melted prongs
I put in the new rack but discovered it only has prongs for a few dishes the rest of it is flat with NO prongs. So it doesn't really work.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Robert W from OSSINEKE, MI
Parts Used:
5304533200
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Rack assembly was rusted or rotted out
Took the old rack out and placed the new one in. Easy peasy!
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Joseph from WOONSOCKET, RI
Parts Used:
5304519906
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
My dishwasher wasnt washing the dishes.
I had to remove the dishwasher and lay it on its back. But after that I swapped out the pump, put it all back together, and I was good to go.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Ron from Sublimity, OR
Parts Used:
154756401
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Cable was broke
Opened door. Located 2 Phillips head screw s attaching the dishwasher to counter and removed them. Slid the dishwasher out about 8 inches. Love broken cable and removed . Inspect spring and attached new cable. Inspected opposite cable and spring. Tucked insulation around dishwasher and slid back into place. Reattached 2 Phillip screws and closed door.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Raymond from VERO BEACH, FL
Parts Used:
5304533200
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Rack was rusting on the bottom due to the plastic no longer covering the metal
simply removed the old slide out rack and replace with new one
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Michael from STEWARTSVILLE, NJ
Parts Used:
5304532229
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Missing part
Just pushed it onto the rod that held the old one
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Patricia from FAIRPORT, NY
Parts Used:
5304507158
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
The spray arm on the lower level had broken
Easy repair .part was perfect. Did have to you tube video to make sure I was doing it correctly. Instructions with part would be helpful.Part arrived quickly without issue!
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Bob from Clinton, OH
Parts Used:
154827601
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Leaking tub seal
Just pulled the old gasket out and popped in the new. I did trim it too shrt however so be careful not to do that.
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
GENE from BRONX, NY
Parts Used:
5304506521
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Dispenser failed to operate
Uncomplicated repair. Remove door, remove old dispenser, install new dispenser.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Leonard from N ROYALTON, OH
Parts Used:
154825001
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Wrench set
The heating element (ring) showed signs of wear
I followed the steps on YouTube.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jimmy from COMSTOCK PARK, MI
Parts Used:
154825001
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Wrench set
My heating element was cracked
Remover the cracked heating element with the new heating element.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the FFID2426TD3A
121 - 135 of 258