Models > SHE45M06UC > Instructions

SHE45M06UC (46) Bosch Dishwasher - Instructions

Jump to:

All Instructions for the SHE45M06UC
31 - 41 of 41
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Ranaye from BECKER, MN
Parts Used:
00165256
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
Not getting water
shut off water, pull dishwasher out, took side insulation off, unhooked what was connected to the float switch and replaced the new with the old. Reconnected everything and put insulation back and wa-la , all done
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
David from PENN VALLEY, PA
Parts Used:
00615079
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Clogged, old filter- dirty dishes
Removed old filter and replaced with new filter. Easy.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Eric from ELVERSON, PA
Parts Used:
00615079, 00165262
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
Not pumping out
Remove spray arm. Pullout. Micro filter big screen . Tork bolt cover and small pliers to grab check valve flapper.
2 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Andrew from Redding, CT
Parts Used:
00490467
Difficulty Level:
Difficult
Total Repair Time:
30 - 60 mins
Needed to replace dispenser
The video pretty much showed it all except...if you have a custom panel on the front like ours did. In that case, yiu have to remove the torx screws along the top PLUS to extras in the side of the part that protrudes into the tub of the washer. Those two are key to releasing the front panel and are also held in with fairly flimsy spring steel so be careful. Otherwise, pretty easy to do.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the SHE45M06UC
31 - 41 of 41