Models > SBV40E10CH > Instructions

SBV40E10CH (01) Bosch Dishwasher - Instructions

Jump to:

All Instructions for the SBV40E10CH
16 - 22 of 22
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
John D from Ocoee, FL
Parts Used:
00611332
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)
E-24
Removed old discharge pump and replaced it with the new one. After four attempts the dishwasher worked once. This cycle continued for the next 3 attempts then it stoped all together. Ordered the sensor, installed it snd the dishwasher still doesn’t work! Now what do I do???
3 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Bill from Seattle, WA
Parts Used:
12054183
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Water leakage from the dishwasher; unknown source.
Followed the video on your site and it was an easy install with no more leakage.
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Toni from GREENSBORO, NC
Parts Used:
00611475
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
One Dishwasher bottom rack wheel broke
Popped the new one right on!
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Callan from CHICAGO, IL
Parts Used:
12054183
Difficulty Level:
Difficult
Total Repair Time:
More than 2 hours
Tools:
Pliers, Screw drivers, Socket set
Chronic water leakage
Replaced ‘sump’ housing , seal was leaking on it- replaced inop float on water level warning system switch, and switch itself as well- replaced drain pump motor attached to sump- replaced o-ring seal at water sprayer inlet valve- replaced water inlet plastic assemble on side of dishwasher- replaced drain hose out of sump assembly.

Used YouTube video to understand repair- this is an involved repair in time and complexity- dishwasher eventually gets turned upside down once removed and stripped down, to remove the white plastic water pan , which then allows access to the guts of all the above parts- some critical seals only come with new assemblies, so you are buying that new part to get a new seal and ensure no new leaks from what you took apart.
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the SBV40E10CH
16 - 22 of 22